[Pardus-kullanicilari] wpa_supplicant kablolu ağ sorunu

28 Ara 2008 Paz 15:56:39 EET

Merhaba acaba bakabildiniz mi???

24 Aralık 2008 Çarşamba 16:25 tarihinde Umurcan Görür <mail at ugorur.com>yazdı:

> Tekrardan ilgilendiğiniz için teşekkürler. Ben yine denedim ve malesef yine
> olmadı.
> Önce Kubuntu'da aldığım mesajı vereyim:
>
> *ugorur at ugorur-kubuntu:~$ sudo wpa_supplicant -Dwired -ieth0
> -c/etc/wpa_supplicant.conf*
> Associated with 01:80:c2:00:00:03
> CTRL-EVENT-EAP-STARTED EAP authentication started
> CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected
> OpenSSL: tls_connection_handshake - Failed to read possible Application
> Data error:00000000:lib(0):func(0):reason(0)
> CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully
>
> Buda Pardus'da aldığım mesaj:
>
> *ugorur at umur-pardus ~ $ sudo /usr/sbin/wpa_supplicant -ieth0 -Dwired
> -c/etc/wpa_supplicant.conf -d*
> Parola:
> Initializing interface 'eth0' conf '/etc/wpa_supplicant.conf' driver
> 'wired' ctr
> l_interface 'N/A' bridge 'N/A'
> Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
> Reading configuration file '/etc/wpa_supplicant.conf'
> ctrl_interface='/var/run/wpa_supplicant'
> ctrl_interface_group='0' (DEPRECATED)
> ap_scan=0
> Priority group 0
>    id=0 ssid=''
> Initializing interface (2) 'eth0'
> wpa_driver_wired_init: Added multicast membership with packet socket
> Own MAC address: 00:1e:68:ec:f1:23
> RSN: flushing PMKID list in the driver
> Setting scan request: 0 sec 100000 usec
> EAPOL: SUPP_PAE entering state DISCONNECTED
> EAPOL: KEY_RX entering state NO_KEY_RECEIVE
> EAPOL: SUPP_BE entering state INITIALIZE
> EAP: EAP entering state DISABLED
> Using existing control interface directory.
> ctrl_interface_group=0
> Added interface eth0
> EAPOL: External notification - portControl=Auto
> Already associated with a configured network - generating associated event
> Association info event
> State: DISCONNECTED -> ASSOCIATED
> Associated to a new BSS: BSSID=01:80:c2:00:00:03
> No keys have been configured - skip key clearing
> Select network based on association information
> Network configuration found for the current AP
> WPA: No WPA/RSN IE available from association info
> WPA: Set cipher suites based on configuration
> WPA: Selected cipher suites: group 30 pairwise 24 key_mgmt 9 proto 2
> WPA: clearing AP WPA IE
> WPA: clearing AP RSN IE
> WPA: using GTK CCMP
> WPA: using PTK CCMP
> WPA: using KEY_MGMT 802.1X
> WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01
> 00
> 00
> 0f ac 04 01 00 00 0f ac 01 00 00
> EAPOL: External notification - portControl=Auto
> Associated with 01:80:c2:00:00:03
> WPA: Association event - clear replay counter
> WPA: Clear old PTK
> EAPOL: External notification - portEnabled=0
> EAPOL: External notification - portValid=0
> EAPOL: External notification - portEnabled=1
> EAPOL: SUPP_PAE entering state CONNECTING
> EAPOL: SUPP_BE entering state IDLE
> EAP: EAP entering state INITIALIZE
> EAP: EAP entering state IDLE
> Cancelling scan request
> EAPOL: startWhen --> 0
> EAPOL: SUPP_PAE entering state CONNECTING
> EAPOL: txStart
> TX EAPOL: dst=01:80:c2:00:00:03
> EAPOL: startWhen --> 0
> EAPOL: SUPP_PAE entering state CONNECTING
> EAPOL: txStart
> TX EAPOL: dst=01:80:c2:00:00:03
> EAPOL: idleWhile --> 0
> EAP: EAP entering state FAILURE
> CTRL-EVENT-EAP-FAILURE EAP authentication failed
> EAPOL: SUPP_PAE entering state AUTHENTICATING
> EAPOL: SUPP_BE entering state FAIL
> EAPOL: SUPP_PAE entering state HELD
> EAPOL: SUPP_BE entering state IDLE
> EAPOL authentication completed unsuccessfully
> EAPOL: startWhen --> 0
> EAPOL: heldWhile --> 0
> EAPOL: disable timer tick
> EAPOL: SUPP_PAE entering state CONNECTING
> EAPOL: enable timer tick
> EAPOL: SUPP_PAE entering state AUTHENTICATING
> EAPOL: SUPP_BE entering state FAIL
> EAPOL: SUPP_PAE entering state HELD
> EAPOL: SUPP_BE entering state IDLE
> EAPOL authentication completed unsuccessfully
> EAPOL: startWhen --> 0
> EAPOL: heldWhile --> 0
> EAPOL: disable timer tick
> EAPOL: SUPP_PAE entering state CONNECTING
> EAPOL: enable timer tick
> EAPOL: SUPP_PAE entering state AUTHENTICATING
> EAPOL: SUPP_BE entering state FAIL
> EAPOL: SUPP_PAE entering state HELD
> EAPOL: SUPP_BE entering state IDLE
> EAPOL authentication completed unsuccessfully
> EAPOL: startWhen --> 0
> ^CCTRL-EVENT-TERMINATING - signal 2 received
> Removing interface eth0
> State: ASSOCIATED -> DISCONNECTED
> No keys have been configured - skip key clearing
> EAPOL: External notification - portEnabled=0
> EAPOL: SUPP_PAE entering state DISCONNECTED
> EAPOL: SUPP_BE entering state INITIALIZE
> EAP: EAP entering state DISABLED
> EAPOL: External notification - portValid=0
> No keys have been configured - skip key clearing
> Cancelling scan request
> Cancelling authentication timeout
> *ugorur at umur-pardus ~ $ sudo /usr/sbin/wpa_supplicant -ieth0 -Dwired
> -c/etc/wpa_supplicant.conf -d*(tekrar denedim)
> Initializing interface 'eth0' conf '/etc/wpa_supplicant.conf' driver
> 'wired' ctrl_interface 'N/A' bridge 'N/A'
> Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
> Reading configuration file '/etc/wpa_supplicant.conf'
> ctrl_interface='/var/run/wpa_supplicant'
> ctrl_interface_group='0' (DEPRECATED)
> ap_scan=0
> Priority group 0
>    id=0 ssid=''
> Initializing interface (2) 'eth0'
> wpa_driver_wired_init: Added multicast membership with packet socket
> Own MAC address: 00:1e:68:ec:f1:23
> RSN: flushing PMKID list in the driver
> Setting scan request: 0 sec 100000 usec
> EAPOL: SUPP_PAE entering state DISCONNECTED
> EAPOL: KEY_RX entering state NO_KEY_RECEIVE
> EAPOL: SUPP_BE entering state INITIALIZE
> EAP: EAP entering state DISABLED
> ctrl_interface_group=0
> Added interface eth0
> EAPOL: External notification - portControl=Auto
> Already associated with a configured network - generating associated event
> Association info event
> State: DISCONNECTED -> ASSOCIATED
> Associated to a new BSS: BSSID=01:80:c2:00:00:03
> No keys have been configured - skip key clearing
> Select network based on association information
> Network configuration found for the current AP
> WPA: No WPA/RSN IE available from association info
> WPA: Set cipher suites based on configuration
> WPA: Selected cipher suites: group 30 pairwise 24 key_mgmt 9 proto 2
> WPA: clearing AP WPA IE
> WPA: clearing AP RSN IE
> WPA: using GTK CCMP
> WPA: using PTK CCMP
> WPA: using KEY_MGMT 802.1X
> WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01
> 00 00 0f ac 04 01 00 00 0f ac 01 00 00
> EAPOL: External notification - portControl=Auto
> Associated with 01:80:c2:00:00:03
> WPA: Association event - clear replay counter
> WPA: Clear old PTK
> EAPOL: External notification - portEnabled=0
> EAPOL: External notification - portValid=0
> EAPOL: External notification - portEnabled=1
> EAPOL: SUPP_PAE entering state CONNECTING
> EAPOL: SUPP_BE entering state IDLE
> EAP: EAP entering state INITIALIZE
> EAP: EAP entering state IDLE
> Cancelling scan request
> EAPOL: startWhen --> 0
> EAPOL: SUPP_PAE entering state CONNECTING
> EAPOL: txStart
> TX EAPOL: dst=01:80:c2:00:00:03
> EAPOL: startWhen --> 0
> EAPOL: SUPP_PAE entering state CONNECTING
> EAPOL: txStart
> TX EAPOL: dst=01:80:c2:00:00:03
> EAPOL: idleWhile --> 0
> EAP: EAP entering state FAILURE
> CTRL-EVENT-EAP-FAILURE EAP authentication failed
> EAPOL: SUPP_PAE entering state AUTHENTICATING
> EAPOL: SUPP_BE entering state FAIL
> EAPOL: SUPP_PAE entering state HELD
> EAPOL: SUPP_BE entering state IDLE
> EAPOL authentication completed unsuccessfully
> EAPOL: startWhen --> 0
> l2_packet_receive - recvfrom: Network is down
> l2_packet_receive - recvfrom: Network is down
> EAPOL: heldWhile --> 0
> EAPOL: disable timer tick
> EAPOL: SUPP_PAE entering state CONNECTING
> EAPOL: enable timer tick
> EAPOL: SUPP_PAE entering state AUTHENTICATING
> EAPOL: SUPP_BE entering state FAIL
> EAPOL: SUPP_PAE entering state HELD
> EAPOL: SUPP_BE entering state IDLE
> EAPOL authentication completed unsuccessfully
> EAPOL: startWhen --> 0
>
> Beni kediciğimize geri dönmemi sağlarsanız çok mutlu olurum.
>
> 24 Aralık 2008 Çarşamba 10:57 tarihinde Furkan Duman <coderlord at gmail.com>yazdı:
>
> 22 Aralık 2008 Pazartesi 15:46 tarihinde Umurcan Görür <mail at ugorur.com>
>> yazdı:
>> > ctrl_interface=/var/run/wpa_supplicant
>> > ctrl_interface_group=0
>> > ap_scan=0
>> > network={
>> >     ca_cert="/home/ugorur/cacert.pem"
>> > key_mgmt=WPA-EAP IEEE8021X
>> > eap=TTLS
>> > phase2="auth=PAP"
>> > identity="kullanıcı adım"
>> > password="şifrem"
>> > eapol_flags=0
>> > }
>>
>> Bu ayarı /etc/wpa_supplicant.conf dosyasındakileri silip içine
>> ekleyin. Kullanıcı adı parola ve sertifikanızı gerekli yerlere
>> eklemeyi ve koymayı unutmayın.
>>
>> komut satırında :
>>
>> sudo /usr/sbin/wpa_supplicant -ieth0 -Dwired -c/etc/wpa_supplicant.conf -d
>>
>> Kablolu ağ genelde eth0 dır ama siz interface adını kontrol edin yine de.
>> Bu komuttan sonra epey uzun bir debug mesajı başlayacak. Eğer
>> bağlantıyı kurarsa ASSOCIATED gibi bir mesaj vermesi lazım en sonunda.
>>
>> Daha sonra Network Manager'da ilgili aygıtın profil check'ini
>> işaretleyin. DHCP varsa ip alması lazım.
>>
>> Eğer wpa_supplicant çıktısında ASSOCIATED göremiyorsanız, bu çıktıyı
>> kopyalayıp buraya gönderirseniz tekrar bakalım.
>>
>> Kolay gelsin.
>>
>> --
>> Furkan Duman
>> _______________________________________________
>> Pardus-kullanicilari e-posta listesi
>> Listeden çıkmak için
>> http://liste.pardus.org.tr/mailman/listinfo/pardus-kullanicilari adresini
>> kullanın.
>> Listeye iletmek istediğiniz soruları  Pardus-kullanicilari at pardus.org.tre-posta adresine gönderin.
>> Liste mesajlarında arama yapmak için http://liste.pardus.org.tr/arama web
>> sayfasına gidin.
>>
>
>
>
> --
> Umurcan Görür (spy_force)
> Yeni Mail
>

-- 
Umurcan Görür (spy_force)
Yeni Mail
-------------- sonraki bölüm --------------
Bir HTML eklentisi temizlendi...
URL: http://liste.pardus.org.tr/pardus-kullanicilari/attachments/20081228/bf44b3b9/attachment-0001.htm 