[Pardus-kullanicilari] wpa_supplicant kablolu ağ sorunu

24 Ara 2008 Çar 16:25:48 EET

Tekrardan ilgilendiğiniz için teşekkürler. Ben yine denedim ve malesef yine
olmadı.
Önce Kubuntu'da aldığım mesajı vereyim:

*ugorur at ugorur-kubuntu:~$ sudo wpa_supplicant -Dwired -ieth0
-c/etc/wpa_supplicant.conf*
Associated with 01:80:c2:00:00:03
CTRL-EVENT-EAP-STARTED EAP authentication started
CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected
OpenSSL: tls_connection_handshake - Failed to read possible Application Data
error:00000000:lib(0):func(0):reason(0)
CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully

Buda Pardus'da aldığım mesaj:

*ugorur at umur-pardus ~ $ sudo /usr/sbin/wpa_supplicant -ieth0 -Dwired
-c/etc/wpa_supplicant.conf -d*
Parola:
Initializing interface 'eth0' conf '/etc/wpa_supplicant.conf' driver 'wired'
ctr
l_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group='0' (DEPRECATED)
ap_scan=0
Priority group 0
   id=0 ssid=''
Initializing interface (2) 'eth0'
wpa_driver_wired_init: Added multicast membership with packet socket
Own MAC address: 00:1e:68:ec:f1:23
RSN: flushing PMKID list in the driver
Setting scan request: 0 sec 100000 usec
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
Using existing control interface directory.
ctrl_interface_group=0
Added interface eth0
EAPOL: External notification - portControl=Auto
Already associated with a configured network - generating associated event
Association info event
State: DISCONNECTED -> ASSOCIATED
Associated to a new BSS: BSSID=01:80:c2:00:00:03
No keys have been configured - skip key clearing
Select network based on association information
Network configuration found for the current AP
WPA: No WPA/RSN IE available from association info
WPA: Set cipher suites based on configuration
WPA: Selected cipher suites: group 30 pairwise 24 key_mgmt 9 proto 2
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: using GTK CCMP
WPA: using PTK CCMP
WPA: using KEY_MGMT 802.1X
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00
00
0f ac 04 01 00 00 0f ac 01 00 00
EAPOL: External notification - portControl=Auto
Associated with 01:80:c2:00:00:03
WPA: Association event - clear replay counter
WPA: Clear old PTK
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: SUPP_BE entering state IDLE
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
Cancelling scan request
EAPOL: startWhen --> 0
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: txStart
TX EAPOL: dst=01:80:c2:00:00:03
EAPOL: startWhen --> 0
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: txStart
TX EAPOL: dst=01:80:c2:00:00:03
EAPOL: idleWhile --> 0
EAP: EAP entering state FAILURE
CTRL-EVENT-EAP-FAILURE EAP authentication failed
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state FAIL
EAPOL: SUPP_PAE entering state HELD
EAPOL: SUPP_BE entering state IDLE
EAPOL authentication completed unsuccessfully
EAPOL: startWhen --> 0
EAPOL: heldWhile --> 0
EAPOL: disable timer tick
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: enable timer tick
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state FAIL
EAPOL: SUPP_PAE entering state HELD
EAPOL: SUPP_BE entering state IDLE
EAPOL authentication completed unsuccessfully
EAPOL: startWhen --> 0
EAPOL: heldWhile --> 0
EAPOL: disable timer tick
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: enable timer tick
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state FAIL
EAPOL: SUPP_PAE entering state HELD
EAPOL: SUPP_BE entering state IDLE
EAPOL authentication completed unsuccessfully
EAPOL: startWhen --> 0
^CCTRL-EVENT-TERMINATING - signal 2 received
Removing interface eth0
State: ASSOCIATED -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portValid=0
No keys have been configured - skip key clearing
Cancelling scan request
Cancelling authentication timeout
*ugorur at umur-pardus ~ $ sudo /usr/sbin/wpa_supplicant -ieth0 -Dwired
-c/etc/wpa_supplicant.conf -d*(tekrar denedim)
Initializing interface 'eth0' conf '/etc/wpa_supplicant.conf' driver 'wired'
ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group='0' (DEPRECATED)
ap_scan=0
Priority group 0
   id=0 ssid=''
Initializing interface (2) 'eth0'
wpa_driver_wired_init: Added multicast membership with packet socket
Own MAC address: 00:1e:68:ec:f1:23
RSN: flushing PMKID list in the driver
Setting scan request: 0 sec 100000 usec
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
ctrl_interface_group=0
Added interface eth0
EAPOL: External notification - portControl=Auto
Already associated with a configured network - generating associated event
Association info event
State: DISCONNECTED -> ASSOCIATED
Associated to a new BSS: BSSID=01:80:c2:00:00:03
No keys have been configured - skip key clearing
Select network based on association information
Network configuration found for the current AP
WPA: No WPA/RSN IE available from association info
WPA: Set cipher suites based on configuration
WPA: Selected cipher suites: group 30 pairwise 24 key_mgmt 9 proto 2
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: using GTK CCMP
WPA: using PTK CCMP
WPA: using KEY_MGMT 802.1X
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00
00 0f ac 04 01 00 00 0f ac 01 00 00
EAPOL: External notification - portControl=Auto
Associated with 01:80:c2:00:00:03
WPA: Association event - clear replay counter
WPA: Clear old PTK
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: SUPP_BE entering state IDLE
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
Cancelling scan request
EAPOL: startWhen --> 0
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: txStart
TX EAPOL: dst=01:80:c2:00:00:03
EAPOL: startWhen --> 0
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: txStart
TX EAPOL: dst=01:80:c2:00:00:03
EAPOL: idleWhile --> 0
EAP: EAP entering state FAILURE
CTRL-EVENT-EAP-FAILURE EAP authentication failed
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state FAIL
EAPOL: SUPP_PAE entering state HELD
EAPOL: SUPP_BE entering state IDLE
EAPOL authentication completed unsuccessfully
EAPOL: startWhen --> 0
l2_packet_receive - recvfrom: Network is down
l2_packet_receive - recvfrom: Network is down
EAPOL: heldWhile --> 0
EAPOL: disable timer tick
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: enable timer tick
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state FAIL
EAPOL: SUPP_PAE entering state HELD
EAPOL: SUPP_BE entering state IDLE
EAPOL authentication completed unsuccessfully
EAPOL: startWhen --> 0

Beni kediciğimize geri dönmemi sağlarsanız çok mutlu olurum.

24 Aralık 2008 Çarşamba 10:57 tarihinde Furkan Duman <coderlord at gmail.com>yazdı:

> 22 Aralık 2008 Pazartesi 15:46 tarihinde Umurcan Görür <mail at ugorur.com>
> yazdı:
> > ctrl_interface=/var/run/wpa_supplicant
> > ctrl_interface_group=0
> > ap_scan=0
> > network={
> >     ca_cert="/home/ugorur/cacert.pem"
> > key_mgmt=WPA-EAP IEEE8021X
> > eap=TTLS
> > phase2="auth=PAP"
> > identity="kullanıcı adım"
> > password="şifrem"
> > eapol_flags=0
> > }
>
> Bu ayarı /etc/wpa_supplicant.conf dosyasındakileri silip içine
> ekleyin. Kullanıcı adı parola ve sertifikanızı gerekli yerlere
> eklemeyi ve koymayı unutmayın.
>
> komut satırında :
>
> sudo /usr/sbin/wpa_supplicant -ieth0 -Dwired -c/etc/wpa_supplicant.conf -d
>
> Kablolu ağ genelde eth0 dır ama siz interface adını kontrol edin yine de.
> Bu komuttan sonra epey uzun bir debug mesajı başlayacak. Eğer
> bağlantıyı kurarsa ASSOCIATED gibi bir mesaj vermesi lazım en sonunda.
>
> Daha sonra Network Manager'da ilgili aygıtın profil check'ini
> işaretleyin. DHCP varsa ip alması lazım.
>
> Eğer wpa_supplicant çıktısında ASSOCIATED göremiyorsanız, bu çıktıyı
> kopyalayıp buraya gönderirseniz tekrar bakalım.
>
> Kolay gelsin.
>
> --
> Furkan Duman
> _______________________________________________
> Pardus-kullanicilari e-posta listesi
> Listeden çıkmak için
> http://liste.pardus.org.tr/mailman/listinfo/pardus-kullanicilari adresini
> kullanın.
> Listeye iletmek istediğiniz soruları  Pardus-kullanicilari at pardus.org.tre-posta adresine gönderin.
> Liste mesajlarında arama yapmak için http://liste.pardus.org.tr/arama web
> sayfasına gidin.
>

-- 
Umurcan Görür (spy_force)
Yeni Mail
-------------- sonraki bölüm --------------
Bir HTML eklentisi temizlendi...
URL: http://liste.pardus.org.tr/pardus-kullanicilari/attachments/20081224/cf740530/attachment-0001.htm 