From: Eray YASYERLI (eyasyerli@hotmail.com)
Date: Sun 19 Jan 2003 - 03:34:49 EET
Bu konuda baya bir yeniyim ama ne haddime ise nvidia nın driverlarını
kurmaya çalıştım tabi XFree de tosladım. Şimdi driverları yükledi sanırım
fakat X serverimi çalıştıramadım /usr/share/doc un içindeki GLX dizinindeki
XF86Config.sample i kullanmaya çalıştım fakat birkaç hata verdi bana tam
olarak bir config dosyası gönderebilecek olan varmı? Ya da sorunumu nasıl
çözebileceğimi söylebilecek olan? Monütörüm Alphascan 520 Sampo. Geforge II
MX200 ekran kartım var.
örnek dosyayı çalıştırmaya çalıştım ve loglardan soruna baktığımda ise
aşağıdaki hatayı aldım
(EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module!
(EE) NVIDIA(0): *** Aborting ***
(II) UnloadModule: "nvidia"
(II) UnloadModule: "vgahw"
(II) Unloading /usr/X11R6/lib/modules/libvgahw.a
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
Ha bu arada kullandığım sample dosyasını da gönderiyorum!
Aşağıdaki X in .sample uzantılı conf dosyasıdır.
##########################################################################
# Sample XF86Config file for NVIDIA XFree86 drivers.
#
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
#
# Be sure to replace the monitor values with correct values for your
# monitor!
##########################################################################
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:-1"
EndSection
##########################################################################
# Server flags section.
##########################################################################
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#NoTrapSignals
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
#DontZap
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
#DontZoom
# This allows the server to start up even if the
# mouse device can't be opened/initialised.
AllowMouseOpenFail
EndSection
##########################################################################
# Input devices
##########################################################################
#
# Keyboard section
#
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "250 30"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
#
# Pointer section
#
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/psaux"
EndSection
##########################################################################
# Module section
##########################################################################
Section "Module"
Load "dbe"
# Load the glx module.
Load "glx"
Load "extmod"
Load "type1"
Load "freetype"
EndSection
##########################################################################
# Monitor section
##########################################################################
Section "Monitor"
Identifier "MyMonitor"
VendorName "Sampo"
ModelName "Alphascan 520"
# be sure to replace these values with values appropriate for your
# monitor!
HorizSync 31-82
VertRefresh 55-120
EndSection
##########################################################################
# Graphics device section(s)
##########################################################################
Section "Device"
Identifier "NV AGP"
VendorName "nvidia"
Driver "nvidia"
# update this with the PCI id of your card. Consult the output
# of the 'lspci' command.
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "NV PCI"
VendorName "nvidia"
Driver "nvidia"
# update this with the PCI id of your card. Consult the output
# of the 'lspci' command.
BusID "PCI:0:13:0"
EndSection
Section "Device"
Identifier "NV AGP TwinView"
VendorName "nvidia"
Driver "nvidia"
# update this with the PCI id of your card. Consult the output
# of the 'lspci' command.
BusID "PCI:1:0:0"
# sample twinview setup
Option "TwinView"
# be sure to replace the HorizSync and VertRefresh with correct values
# for your monitor!
Option "SecondMonitorHorizSync" "31-82"
Option "SecondMonitorVertRefresh" "55-120"
Option "TwinViewOrientation" "RightOf"
Option "MetaModes" "1280x1024,1280x1024;
1024x768,1024x768"
Option "ConnectedMonitor" "crt,crt"
EndSection
##########################################################################
# Screen sections
##########################################################################
#
# screen section for an nvidia AGP card
#
Section "Screen"
Identifier "Screen AGP"
Device "NV AGP"
Monitor "MyMonitor"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x400"
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubsection
EndSection
#
# screen section for an nvidia PCI card
#
Section "Screen"
Identifier "Screen PCI"
Device "NV PCI"
Monitor "MyMonitor"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x400"
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubsection
EndSection
#
# screen section for an nvidia AGP TwinView card
# (look at the appropriate Device section)
#
Section "Screen"
Identifier "Screen AGP TwinView"
Device "NV AGP TwinView"
Monitor "MyMonitor"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x400"
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubsection
EndSection
##########################################################################
# ServerLayout sections
# (invoke using the '-layout' option of 'startx'.
##########################################################################
#
# just one agp card
#
Section "ServerLayout"
Identifier "AGP"
Screen "Screen AGP"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
#
# just one pci card
#
Section "ServerLayout"
Identifier "PCI"
Screen "Screen PCI"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
#
# 2 cards, non twinview
#
Section "ServerLayout"
Identifier "Both"
Screen "Screen AGP"
Screen "Screen PCI" LeftOf "Screen AGP"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
#
# just one agp twinview card
#
Section "ServerLayout"
Identifier "AGPTwinView"
Screen "Screen AGP TwinView"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
#
# 2 cards, one agp twinview and one pci (3 monitors total)
#
Section "ServerLayout"
Identifier "BothTwinView"
Screen "Screen AGP TwinView"
Screen "Screen PCI" LeftOf "Screen AGP TwinView"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
---- evet bunu yaptım fakat çalıştıramadı :(
Şimdiden Çok Teşekkürler!
_________________________________________________________________
MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*
http://join.msn.com/?page=features/virus
-----------------------------------------------------------------------
Liste üyeliğiniz ile ilgili her türlü işlem için
http://liste.linux.org.tr adresindeki web arayüzünü kullanabilirsiniz.
http://www.linux.org.tr/listeler.php sayfasina bakiniz.
Listeden çıkmak için: 'linux-baslangic-request@linux.org.tr' adresine,
"Konu" kısmında "unsubscribe" yazan bir e-posta gönderiniz.
-----------------------------------------------------------------------