[Pardus-kullanicilari] Fax modem in portu

[Gökhan Yurdusev]

sanırım ttyS0 ama fax kurulumu sonunda

CountryCode:            90
AreaCode:               212
FAXNumber:              295 8799
LongDistancePrefix:     0
InternationalPrefix:    00
DialStringRules:        etc/dialrules
SessionTracing:         11
RecvFileMode:           0644
LogFileMode:            0644
DeviceMode:             0666
RingsBeforeAnswer:      1
SpeakerVolume:          low
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        "NothingSetup"
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
MaxRecvPages:           25

Are these ok [yes]?

Now we are going to probe the tty port to figure out the type
of modem that is attached.  This takes a few seconds, so be patient.
Note that if you do not have the modem cabled to the port, or the
modem is turned off, this may hang (just go and cable up the modem
or turn it on, or whatever).

*Probing for best speed to talk to modem: 38400 19200 9600 4800 2400 1200
Unable to deduce DTE-DCE speed; check that you are using the
correct device and/or that your modem is setup properly.  If
all else fails, try the -s option to lock the speed.*
Do you want to run faxaddmodem to configure another modem [yes]?


Bu oluyor ve de Hylafax benim modemi beÄŸenmiyor...
2009/5/11 Gökhan Yurdusev <gyurdusev at gmail.com>

> Merhaba,
>
> 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev
> 01)
> 01:00.0 Communication controller: Conexant Systems, Inc. HSF 56k Data/Fax
> Modem (rev 01)
>
> Bu pci modemin hangi portta çalıştığını nasıl bilebilirim? Bu arada KDE
> bilgi merkesinde bu modemin Capabilities: bölümünde <access denied>
> yazıyor...
>
> Hylafax kurmak istiyorum ama kurulum önce modemin tanıtılması gerektiğini
> söylüyor.
>
> Kolay gelsin herkese,
>
> Gökhan
>
-------------- sonraki bölüm --------------
Bir HTML eklentisi temizlendi...
URL: http://liste.pardus.org.tr/pardus-kullanicilari/attachments/20090511/dcd7de90/attachment.htm