[Pardus-kullanicilari] Dizustu Bilgisayarimda devam eden kurulamama sorunu...
Server Acim
sacim at kde.org.tr
27 Eyl 2008 Cmt 14:32:47 EEST
On Saturday 27 September 2008 10:23:34 Server Acim wrote:
> On Saturday 27 September 2008 01:37:54 Emre Erenoglu wrote:
> > Merhaba,
> >
> > 2008/9/27 Server Acim <sacim at kde.org.tr>
> >
> > > Sevgili Emre bey,
> > > Bir soru sorayım. Bilgisizliğimin kusuruna bakmayın lütfen.
> > > BIOS güncellemesini nasıl yapacağım? Bana "for dummies" mantığıyla bunu
> > > "adım
> > > adım" anlayabilir misiniz lütfen?
> > > Tüm F4, F5 seçeneklerini denedim. Sonuç hep aynı idi.
> >
> > BIOS guncellemelerini bilgisayarin uretici sayfasindan "support" kismina
> > gidip kendi bilgisayar marka ve modelinizi secerek yapabilirsiniz. Ama
> > once diger secenekleri tuketin.
> >
> > > Bir başka soru daha sorayım:
> > > > *nano /etc/X11/xorg.conf
> > >
> > > yazarken başına sizin yazdığınız gibi * (yıldız) işaretini ekleyecek
> > > miyim? Çünkü, onu da denediğimi hatırlıyorum. Ve boş bir dosya
> > > açıldığını hatırlıyorum. Ama bu yazdıklarınızın hepsini deneyeceğim.
> >
> > Hayir yildiz yok, nereden geldi anlamadim. Yazarken hata yapmis
> > olabilirim. komutun adi nano
> >
> > Emre
>
> Sevgili Emre bey,
> BIOS dışında tüm yazdıklarınızı yaptım. Olmadı. Video görüntüsünde görülen
> sonucun dışında bir sonuca ulaşamıyorum. Yalnız, ekran bozulduğunda
> CTR+ALT+F1 tuşu ile komut satırına geçerken ekran yarım saniyeliğine,
> normal YALI - Kurulum ekranı oluyor. Ama hemen ardından tabii ki konsola
> düşüyorum.
>
> Bu arada Google'da Escort E-Note modelini bir arayayım derken 2006 yılında
> Onur Küçük ile yaptığım bir yazışmaya rastladım.
>
> http://liste.uludag.org.tr/pardus-kullanicilari/2006-April/002313.html
>
> Bu e-mailde Onur'un verdiği NASIL: I810_Chipset sayfası artık yerinde yok.
> Son durum böyle.
> Sevgiler.
İlgili hata adresine de gönderdiğim dosyaları sizlere de gönderiyorum. Aynı
dizüstü bilgisayara Pardus 2008 sorunsuz kurdum. Tüm güncellemeleri yaptım.
Yine aynı sorun baş gösterdi. Ben de konsolda, xorg.conf dosyasının başka bir
adla /home dizinine kaydettim.
"dmesg" dosyasını da yeniden başlatmadan önce almıştım. Çünkü dizüstü
bilgisayarımın klavyesinde "<" ve ">" tuşları çalışmıyor. Harici klavyem ise
okuldaki odamda.
Acaba bu dosyalara faydalı olur mu?
Sevgiler.
--
Server ACİM
- Besteci (Composer)
- Üniversite Öğretim Üyesi (Associate Proffesor)
- Pardus kullanıcısı, destekçisi ve katkıcısı (Pardus user, supporter &
contributor)
http://www.serveracim.net
-------------------------
<Özgürlük için - for Freedom> http://www.ozgurlukicin.com
<Pardus Linux> http://www.pardus.org.tr |
http://www.pardus.org.tr/eng/index.html
-------------- sonraki bölüm --------------
Linux version 2.6.25.9-101 (pardus at buildfarm) (gcc version 4.3.1 (Pardus Linux) ) #1 SMP Thu Jun 26 19:56:51 EEST 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001eee0000 (usable)
BIOS-e820: 000000001eee0000 - 000000001eeeb000 (ACPI data)
BIOS-e820: 000000001eeeb000 - 000000001ef00000 (ACPI NVS)
BIOS-e820: 000000001ef00000 - 0000000020000000 (reserved)
BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
0MB HIGHMEM available.
494MB LOWMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
Scan SMP from c009f800 for 1024 bytes.
Entering add_active_range(0, 0, 126688) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 126688
HighMem 126688 -> 126688
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 126688
On node 0 totalpages: 126688
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 957 pages used for memmap
Normal zone: 121635 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
DMI present.
ACPI: RSDP 000F6610, 0014 (r0 COMPAL)
ACPI: RSDT 1EEE593F, 0030 (r1 COMPAL Montara 6040000 LTP 0)
ACPI: FACP 1EEEAED2, 0074 (r1 COMPAL MONTARA 6040000 PTL 50)
ACPI: DSDT 1EEE5973, 555F (r1 COMPAL MONTARAG 6040000 MSFT 100000E)
ACPI: FACS 1EEFBFC0, 0040
ACPI: BOOT 1EEEAFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
ACPI: APIC 1EEEAF7E, 005A (r1 INTEL MONTARAG 6040000 PTL 50)
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 20000000:dec10000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
PM: Registered nosave memory: 00000000000d0000 - 00000000000d8000
PM: Registered nosave memory: 00000000000d8000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125699
Kernel command line: root=LABEL=PARDUS_ROOT vga=791 splash=silent quiet resume=/dev/sda6
bootsplash: silent mode.
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 2198.252 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 493272k/506752k available (1900k kernel code, 12908k reserved, 1021k data, 264k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffe14000 - 0xfffff000 (1964 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xdf800000 - 0xff7fe000 ( 511 MB)
lowmem : 0xc0000000 - 0xdeee0000 ( 494 MB)
.init : 0xc03e2000 - 0xc0424000 ( 264 kB)
.data : 0xc02db0dc - 0xc03da67c (1021 kB)
.text : 0xc0100000 - 0xc02db0dc (1900 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=128, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 4398.70 BogoMIPS (lpj=2199353)
Security Framework initialized
AppArmor: AppArmor initialized <NULL>
AppArmor: Registered secondary security module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20070126
CPU0: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 2.20GHz stepping 07
Total of 1 processors activated (4398.70 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
CPU0 attaching sched-domain:
domain 0: span 00000001
groups: 00000001
net_namespace: 548 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd7f4, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs *10 11)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
AppArmor: AppArmor Filesystem Enabled
ACPI: RTC can wake from S4
system 00:04: ioport range 0x200-0x20f has been reserved
system 00:04: ioport range 0x600-0x60f has been reserved
system 00:04: ioport range 0x700-0x70f has been reserved
system 00:04: ioport range 0x800-0x80f has been reserved
system 00:04: ioport range 0x1000-0x107f has been reserved
system 00:04: ioport range 0x1180-0x11bf has been reserved
system 00:04: ioport range 0x1200-0x120f has been reserved
system 00:04: ioport range 0xfe00-0xfe01 has been reserved
system 00:04: iomem range 0xfebffc00-0xfebfffff has been reserved
system 00:04: iomem range 0xfff80000-0xffffffff could not be reserved
system 00:04: iomem range 0xfabf8000-0xfabf8fdf has been reserved
system 00:04: iomem range 0xfabfa000-0xfabfafdf has been reserved
PCI: Bus 3, cardbus bridge: 0000:02:04.0
IO window: 0x00003800-0x000038ff
IO window: 0x00003c00-0x00003cff
PREFETCH window: 0x30000000-0x33ffffff
MEM window: 0x3c000000-0x3fffffff
PCI: Bus 7, cardbus bridge: 0000:02:04.1
IO window: 0x00001400-0x000014ff
IO window: 0x00002800-0x000028ff
PREFETCH window: 0x34000000-0x37ffffff
MEM window: 0x40000000-0x43ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 3000-3fff
MEM window: 0xe0200000-0xe02fffff
PREFETCH window: 0x0000000030000000-0x0000000037ffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 20 (level, low) -> IRQ 20
ACPI: PCI Interrupt 0000:02:04.1[B] -> GSI 21 (level, low) -> IRQ 21
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
Unpacking initramfs... done
Freeing initrd memory: 4741k freed
Simple Boot Flag at 0x36 set to 0x1
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
type=2000 audit(1222503835.448:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
vesafb: framebuffer at 0xe8000000, mapped to 0xdf880000, using 6144k, total 16192k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: silentjpeg size 170855 bytes
bootsplash: ...found (1024x768, 25378 bytes, v3).
Console: switching to colour frame buffer device 128x45
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input0
cpuidle: using governor ladder
cpuidle: using governor menu
NET: Registered protocol family 1
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 264k freed
Write protecting the kernel read-only data: 832k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0100000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.25.9-101 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
ACPI: ACPI Dock Station Driver
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.1 to 64
ACPI: PCI interrupt for device 0000:00:1f.1 disabled
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.25.9-101 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 1-0:1.0: unable to enumerate USB device on port 3
input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input2
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input3
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.25.9-101 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.25.9-101 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[e0200000-e02007ff] Max Packet=[2048] IR/IT contexts=[4/8]
usb 1-5: new high speed USB device using ehci_hcd and address 3
ata_piix 0000:00:1f.1: version 2.12
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
usb 1-5: configuration #1 chosen from 1 choice
usb 1-5: New USB device found, idVendor=0471, idProduct=1236
usb 1-5: New USB device strings: Mfr=16, Product=32, SerialNumber=0
usb 1-5: Product: USB2.0 WLAN
usb 1-5: Manufacturer: Philips
ata1.00: ATA-6: FUJITSU MHT2030AT, 009B, max UDMA/100
ata1.00: 58605120 sectors, multi 16: LBA
ata1.00: configured for UDMA/100
usb 3-1: new low speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: New USB device found, idVendor=05e3, idProduct=1205
usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-1: Product: USB Mouse
ata2.00: ATAPI: DW-224E, F.0A, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2030A 009B PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM TEAC DW-224E F.0A PQ: 0 ANSI: 5
usbcore: registered new interface driver hiddev
input: USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input4
input,hidraw0: USB HID v1.10 Mouse [USB Mouse ] on usb-0000:00:1d.1-1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 58605120 512-byte hardware sectors (30006 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 58605120 512-byte hardware sectors (30006 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
PM: Starting manual resume from disk
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f3836000375]
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
udevd version 124 started
iTCO_vendor_support: vendor-support=0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
Linux agpgart interface v0.103
iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
agpgart: Detected an Intel 855GM Chipset.
agpgart: Detected 16252K stolen memory.
agpgart: AGP aperture is 128M @ 0xe8000000
slamr: module license 'Smart Link Ltd.' taints kernel.
slamr: SmartLink AMRMO modem.
slamr: probe 8086:24c6 ICH4 card...
ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1f.6 to 64
slamr: mc97 codec is SIL27
slamr: slamr0 is ICH4 card.
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
ACPI: Lid Switch [LID]
intel_rng: FWH not detected
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input7
ACPI: Power Button (CM) [PWRB]
ACPI: Battery Slot [BAT1] (battery present)
[drm] Initialized drm 1.1.0 20060810
ACPI: AC Adapter [ACAD] (on-line)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:02/input/input8
ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THRM] (64 C)
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:02:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp 0000:02:03.0: Try the "8139too" driver instead.
Yenta: CardBus bridge found at 0000:02:04.0 [14c0:0012]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:04.0, mfunc 0x011c1122, devctl 0x44
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
[drm] Initialized i915 1.12.0 20071122 on minor 0
PCI: Setting latency timer of device 0000:00:02.1 to 64
[drm] Initialized i915 1.12.0 20071122 on minor 1
Yenta: ISA IRQ mask 0x0cb8, PCI irq 20
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
cs: IO port probe 0x3000-0x3fff: clean.
pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x37ffffff
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 19
eth0: RealTek RTL8139 at 0xe024e800, 00:02:3f:bb:03:1f, IRQ 19
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Yenta: CardBus bridge found at 0000:02:04.1 [14c0:0012]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:04.1, mfunc 0x011c1122, devctl 0x44
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
Yenta: ISA IRQ mask 0x0cb8, PCI irq 21
Socket status: 30000020
Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a
pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
cs: IO port probe 0x3000-0x3fff: clean.
pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x37ffffff
usb 1-5: reset high speed USB device using ehci_hcd and address 3
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
phy0: Selected rate control algorithm 'pid'
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1f.5 to 64
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
pccard: CardBus card inserted into slot 1
yenta EnE: chaning testregister 0xC9, 0c -> 0c
ppdev: user-space parallel port driver
zd1211rw 1-5:1.0: phy0
usbcore: registered new interface driver zd1211rw
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
intel8x0_measure_ac97_clock: measured 91785 usecs
intel8x0: clocking to 48000
lp0: using parport0 (interrupt-driven).
Marking TSC unstable due to: TSC halts in idle.
PCI: Enabling device 0000:07:00.0 (0000 -> 0001)
ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:07:00.0 to 64
ALSA /var/pisi/alsa-driver-1.0.17_rc2-33/work/alsa-driver-1.0.17rc2/pci/emu10k1/emu10k1_main.c:226: Audigy2 value: Special config.
ALSA /var/pisi/alsa-driver-1.0.17_rc2-33/work/alsa-driver-1.0.17rc2/pci/emu10k1/../../alsa-kernel/pci/emu10k1/io.c:239: Writing to ADC failed!
ALSA /var/pisi/alsa-driver-1.0.17_rc2-33/work/alsa-driver-1.0.17rc2/pci/emu10k1/../../alsa-kernel/pci/emu10k1/io.c:241: status=0x634, reg=23, value=0
ALSA /var/pisi/alsa-driver-1.0.17_rc2-33/work/alsa-driver-1.0.17rc2/pci/emu10k1/../../alsa-kernel/pci/emu10k1/io.c:239: Writing to ADC failed!
ALSA /var/pisi/alsa-driver-1.0.17_rc2-33/work/alsa-driver-1.0.17rc2/pci/emu10k1/../../alsa-kernel/pci/emu10k1/io.c:241: status=0x634, reg=7, value=0
ALSA /var/pisi/alsa-driver-1.0.17_rc2-33/work/alsa-driver-1.0.17rc2/pci/emu10k1/../../alsa-kernel/pci/emu10k1/io.c:239: Writing to ADC failed!
ALSA /var/pisi/alsa-driver-1.0.17_rc2-33/work/alsa-driver-1.0.17rc2/pci/emu10k1/../../alsa-kernel/pci/emu10k1/io.c:241: status=0x634, reg=11, value=34
ALSA /var/pisi/alsa-driver-1.0.17_rc2-33/work/alsa-driver-1.0.17rc2/pci/emu10k1/../../alsa-kernel/pci/emu10k1/io.c:239: Writing to ADC failed!
ALSA /var/pisi/alsa-driver-1.0.17_rc2-33/work/alsa-driver-1.0.17rc2/pci/emu10k1/../../alsa-kernel/pci/emu10k1/io.c:241: status=0x634, reg=12, value=34
EXT3 FS on sda1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1028120k swap on /dev/sda6. Priority:-1 extents:1 across:1028120k
Clocksource tsc unstable (delta = -218677490 ns)
IA-32 Microcode Update Driver: v1.14a <tigran at aivazian.fsnet.co.uk>
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
bootsplash: status on console 0 changed to on
zd1211rw 1-5:1.0: firmware version 4725
zd1211rw 1-5:1.0: zd1211b chip 0471:1236 v4810 high 00-12-bf AL2230_RF pa0 g--NS
ADDRCONF(NETDEV_UP): wlan0: link is not ready
NET: Registered protocol family 17
wlan0: Initial auth_alg=0
wlan0: authenticate with AP 00:14:c1:4a:8e:5d
wlan0: RX authentication from 00:14:c1:4a:8e:5d (alg=0 transaction=2 status=0)
wlan0: authenticated
wlan0: associate with AP 00:14:c1:4a:8e:5d
wlan0: RX AssocResp from 00:14:c1:4a:8e:5d (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: switched to short barker preamble (BSSID=00:14:c1:4a:8e:5d)
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
padlock: VIA PadLock not detected.
wlan0: no IPv6 routers present
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
-------------- sonraki bölüm --------------
Section "Module"
SubSection "extmod"
Option "omit xfree86-dga" "true"
EndSubSection
EndSection
Section "dri"
Mode 0666
EndSection
Section "Files"
RgbPath "/usr/lib/X11/rgb"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/dejavu/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/freefont/"
FontPath "/usr/share/fonts/TrueType/"
FontPath "/usr/share/fonts/corefonts"
FontPath "/usr/share/fonts/Speedo/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/encodings/"
EndSection
Section "ServerFlags"
Option "BlankTime" "0"
Option "OffTime" "0"
Option "SuspendTime" "0"
Option "AllowMouseOpenFail" "true"
Option "StandbyTime" "0"
EndSection
Section "InputDevice"
Identifier "Keyboard"
Driver "kbd"
Option "XkbLayout" "tr"
Option "XkbModel" "pc105"
Option "XkbVariant" "basic"
Option "CoreKeyboard" "true"
EndSection
Section "InputDevice"
Identifier "Mouse"
Driver "mouse"
Option "CorePointer" "true"
EndSection
Section "Device"
Identifier "VideoCard"
Driver "intel"
VendorName "Intel Corporation"
BoardName "82852/855GM Integrated Graphics Device"
BusId "PCI:0:2:0"
Option "Monitor-LVDS" "Monitor[LVDS]"
EndSection
Section "Screen"
Identifier "Screen"
Device "VideoCard"
Monitor "Monitor[LVDS]"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Layout"
Screen "Screen"
EndSection
Section "Monitor"
Identifier "Monitor[LVDS]"
Option "Enable" "true"
EndSection
-------------- sonraki bölüm --------------
Yazı olmayan bir eklenti temizlendi...
İsim: kullanılamıyor
Tür: application/pgp-signature
Boyut: 197 bayt
Tanım: This is a digitally signed message part.
Url: http://liste.pardus.org.tr/pardus-kullanicilari/attachments/20080927/f0ab195f/attachment-0001.pgp
Pardus-kullanicilari mesaj listesiyle ilgili
daha fazla bilgi