[Pardus-kullanicilari] K3B sorunu

Gökhan Yurdusev gyurdusev at gmail.com
10 Haz 2008 Sal 22:44:46 EEST 

Merhaba,

Başarılı bir şekilde CD ve DVD yazarken, birden yazamaz oldum. Muhtemel bir
tampon bellek hatası oldu der K3B. Hata çıktısını aynen yapıştırıyorum,
tercüme edebilecek bir arkadaşım var mıdır? .../kde/share altındaki ilgili
klasörü ve de /config içindeki RC li ilgili dosyayı silmeyi denedim ama
olmadı.

Selamlar

System
-----------------------
K3b Version: 1.0.4

KDE Version: 3.5.9
QT Version:  3.3.8b
Kernel:      2.6.18.8-86
Devices
-----------------------
ASUS DRW-1608P 1.40 (/dev/hda, ) [CD-R, CD-RW, CD-Rom, DVD-Rom, DVD-R,
DVD-RW, DVD+R, DVD+RW, DVD+R Çift Katman] [DVD-Rom, DVD-R Sıralı, DVD-R Çift
Katman Sıralı, DVD-R Çift Katman Atlama, DVD-RW Kısıtlanmış Üzerine Yazma,
DVD-RW Sıralı, DVD+RW, DVD+R, DVD-R Çift Katman, CD-Rom, CD-R, CD-RW] [SAO,
TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Sınırlandırılmış
Yeniden Yazma]

Used versions
-----------------------
cdrecord: 2.1.1a37

cdrecord
-----------------------
scsidev: '/dev/hda'
devname: '/dev/hda'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
SCSI buffer size: 64512
Cdrecord-ProDVD-ProBD-Clone 2.01.01a37 (i686-pc-linux-gnu) Copyright (C)
1995-2008 Joerg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.9'.
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'ASUS    '
Identifikation : 'DRW-1608P       '
Revision       : '1.40'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: CD-R
Profile: DVD+R/DL
Profile: DVD+R
Profile: DVD+RW
Profile: DVD-R/DL layer jump recording
Profile: DVD-R/DL sequential recording
Profile: DVD-RW sequential recording
Profile: DVD-RW restricted overwrite
Profile: DVD-R sequential recording
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R (current)
Profile: CD-ROM
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1267712 = 1238 KB
FIFO size      : 9437184 = 9216 KB
Track 01: data   685 MB
Total size:      787 MB (78:01.56) = 351117 sectors
Lout start:      787 MB (78:03/42) = 351117 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 6
Disk Is not unrestricted
Disk Is not erasable
  Disk sub type: Medium Type C, low Beta category (C-) (6)
  ATIP start of lead in:  -11231 (97:32/19)
  ATIP start of lead out: 359846 (79:59/71)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 27
Manufacturer: Prodisc Technology Inc.
    Capacity  Blklen/Sparesz.  Format-type  Type
           0             2048         0x00  Unformated or Blank Media
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 8729
Starting to write CD/DVD/BD at speed 32 in real SAO mode for single session.
Last chance to quit, starting real write in 3 seconds.
   2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Performing OPC...
Sending CUE sheet...
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01:    0 of  685 MB written.
/usr/bin/cdrecord: Success. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 00 5D 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 00 00 00 0E 00 00 00 00 08 03 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x08 Qual 0x03 (logical unit communication crc error
(ultra-dma/32)) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 0.002s timeout 200s
/usr/bin/cdrecord: A write error occured.
/usr/bin/cdrecord: Please properly read the error message above.
write track data: error after 190464 bytes
Writing  time:   21.542s
Average write speed 930.8x.
Fixating...
/usr/bin/cdrecord: Success. flush cache: scsi sendcmd: no error
CDB:  35 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 00 00 00 0E 00 00 00 00 44 00 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x44 Qual 0x00 (internal target failure) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 14.605s timeout 200s
Trouble flushing the cache
Fixating time:   14.617s
/usr/bin/cdrecord: fifo had 147 puts and 4 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 1 times full, min fill was
97%.

cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/hda speed=32 -dao
driveropts=burnfree -eject fs=9m -data -tsize=351117s -



-- 
Gokhan Yurdusev
gyurdusev at gmail.com
-------------- sonraki bölüm --------------
Bir HTML eklentisi temizlendi...
URL: http://liste.pardus.org.tr/pardus-kullanicilari/attachments/20080610/bfb5bb70/attachment.htm

Pardus-kullanicilari mesaj listesiyle ilgili daha fazla bilgi