[Pardus-kullanicilari] Pardus 2007.3 Beta kurulumu sonrası hatalar

[Onur Küçük]

> idebus=xx NFORCE-MCP61: IDE controller at PCI slot 0000:00: 06.0
> NFORCE-MCP61: chipset revision 162
> NFORCE-MCP61: not 100% native mode: will probe irqs later
> NFORCE-MCP61: BIOS didn't set cable bits correctly. Enabling
> workaround. NFORCE-MCP61: 0000:00:06.0 (rev a2) UDMA133 controller
>     ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
> Probing IDE interface ide0...
> hda: SAMSUNG SP1613N, ATA DISK drive
> hdb: HL-DT-ST GCE-8527B, ATAPI CD/DVD-ROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Probing IDE interface ide1...
> hda: max request size: 512KiB
> hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63,
> UDMA(100)
> hda: cache flushes supported
>  hda: hda1 hda2 hda4
> hdb: ATAPI 52X CD-ROM CD-R/RW drive, 1536kB Cache, UDMA(33)

> ata1: SATA max UDMA/133 cmd 0xD400 ctl 0xD082 bmdma 0xC880 irq 15
> ata2: SATA max UDMA/133 cmd 0xD000 ctl 0xCC02 bmdma 0xC888 irq 15

> ata1: SATA link down (SStatus 0 SControl 300)
> ATA: abnormal status 0x7F on port 0xD407

> ata2: SATA link down (SStatus 0 SControl 300)
> ATA: abnormal status 0x7F on port 0xD007

> ata3: SATA max UDMA/133 cmd 0xC800 ctl 0xC482 bmdma 0xC000 irq 5
> ata4: SATA max UDMA/133 cmd 0xC400 ctl 0xC082 bmdma 0xC008 irq 5

> ata3: SATA link down (SStatus 0 SControl 300)
> ATA: abnormal status 0x7F on port 0xC807

> ata4: SATA link down (SStatus 0 SControl 300)
> ATA: abnormal status 0x7F on port 0xC407

 Bilgisayarınızda bir PATA harddisk (hani şu IDE dedikleri) , bir PATA
CDROM var, hiç SATA disk yok değil mi ? Eğer öyle ise BIOS dan SATA
disk portlarını kapatmanız pek çok sorunu çözecek gibi geliyor bana.


-- 
 Onur Küçük                                      Knowledge speaks,   
 <onur.--.-.pardus.org.tr>                       but wisdom listens