[Pardus-kullanicilari] Sadece kulaklıktan ses almayı başaramadıım
Fatih Genç
fatih.genc at linux.org.tr
28 Tem 2007 Cmt 03:22:59 EEST
MSI marka VR600 model bir laptop kullanıyorum sadece kulaklıktan ses almayı
bir türlü başaramadım kmix te kulaklık ve front diye iki seçenek var
hangisini açsam veya kapatsam kulaklık ve hopörlörden aynı anda ses geliyor
yada gidiyor kapattığımda ikiside kapanıyor yani ses gidiyor aynı şekilde
tersinde de açılıyor.ben sadece kulaklıktan ses almak istiyorum. Ne
yapmalıyım???
işinize yarama ihtimali olanbilgiler ektedir
--
Fatih Genç
http://fatihgenc.pandela.net
-------------- sonraki bölüm --------------
Bir HTML eklentisi temizlendi...
URL: http://liste.pardus.org.tr/pardus-kullanicilari/attachments/20070728/e658b3f6/attachment-0001.htm
-------------- sonraki bölüm --------------
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
04:04.0 CardBus bridge: O2 Micro, Inc. OZ711MP1/MS1 MemoryCardBus Controller (rev 21)
04:04.2 Class 0805: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01)
04:04.3 Bridge: O2 Micro, Inc. Integrated MS/xD Controller (rev 01)
04:04.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02)
-------------- sonraki bölüm --------------
Module Size Used by
i915 18240 2
drm 62260 3 i915
snd_pcm_oss 41984 0
snd_mixer_oss 16192 1 snd_pcm_oss
snd_seq_dummy 4100 0
snd_seq_oss 31424 0
snd_seq_midi_event 7040 1 snd_seq_oss
snd_seq 47536 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 7948 3 snd_seq_dummy,snd_seq_oss,snd_seq
af_packet 20808 4
i2c_i801 7436 0
i2c_core 19968 1 i2c_i801
serio_raw 7012 0
snd_hda_intel 243760 5
snd_pcm 72740 3 snd_pcm_oss,snd_hda_intel
snd_timer 22116 3 snd_seq,snd_pcm
snd 52776 17 snd_pcm_oss,snd_mixer_oss,snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_pcm,snd_timer
snd_page_alloc 12648 8 snd_mixer_oss,snd_seq_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_pcm,snd_timer,snd
r8169 28936 0
pcmcia 35228 0
firmware_class 9824 1 pcmcia
yenta_socket 25068 1
rsrc_nonstatic 12096 1 yenta_socket
pcmcia_core 38388 3 pcmcia,yenta_socket,rsrc_nonstatic
cpufreq_powersave 1952 0
tsdev 7680 0
speedstep_centrino 8800 1
freq_table 4640 1 speedstep_centrino
cpufreq_userspace 4544 0
intel_agp 22460 1
agpgart 32264 3 drm,intel_agp
sdhci 17164 0
mmc_core 23648 1 sdhci
cpufreq_ondemand 6604 2
rt73 266560 0
sr_mod 16388 0
sd_mod 18432 4
ohci1394 31440 0
ieee1394 93528 1 ohci1394
uhci_hcd 21900 0
ehci_hcd 29960 0
usbcore 116772 4 rt73,uhci_hcd,ehci_hcd
ata_piix 14216 3
libata 93428 1 ata_piix
scsi_mod 129260 3 sr_mod,sd_mod,libata
-------------- sonraki bölüm --------------
Linux version 2.6.18.8-86 (pardus at buildfarm) (gcc version 3.4.6) #2 SMP Sat Jul 7 18:45:16 EEST 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001f7c0000 (usable)
BIOS-e820: 000000001f7c0000 - 000000001f7ce000 (ACPI data)
BIOS-e820: 000000001f7ce000 - 000000001f800000 (ACPI NVS)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
503MB LOWMEM available.
found SMP MP-table at 000ff780
On node 0 totalpages: 128960
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 124864 pages, LIFO batch:31
DMI 2.3 present.
IO/L-APIC allowed because system is MP or new enough
ACPI: RSDP (v000 MSI ) @ 0x000f8ef0
ACPI: RSDT (v001 MSI_NB MEGABOOK 0x04022007 MSFT 0x00000097) @ 0x1f7c0000
ACPI: FADT (v002 MSI 1613 0x04022007 MSFT 0x00000097) @ 0x1f7c0200
ACPI: MADT (v001 MSI OEMAPIC 0x04022007 MSFT 0x00000097) @ 0x1f7c0390
ACPI: MCFG (v001 MSI OEMMCFG 0x04022007 MSFT 0x00000097) @ 0x1f7c03f0
ACPI: SLIC (v001 MSI_NB MEGABOOK 0x04022007 MSFT 0x00000097) @ 0x1f7c0430
ACPI: OEMB (v001 MSI AMI_OEM 0x04022007 MSFT 0x00000097) @ 0x1f7ce040
ACPI: HPET (v001 MSI OEMHPET 0x04022007 MSFT 0x00000097) @ 0x1f7c4670
ACPI: DSDT (v001 MSI_NB MEGABOOK 0x04022007 INTL 0x20051117) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:14 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 6:14 APIC version 20
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0xffffffff base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 20000000 (gap: 1f800000:df600000)
Detected 1866.914 MHz processor.
Built 1 zonelists. Total pages: 128960
Kernel command line: root=/dev/sda1 video=vesafb:nomtrr,pmipal,ywrap,1024x768-32 at 60 splash=silent,fadein,theme:pardus console=tty2 mudur=language:tr quiet resume=/dev/sda5 combined_mode=libata
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 502628k/515840k available (2433k kernel code, 12560k reserved, 828k data, 1308k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xfed00000 (virtual 0xd0000000), IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Using HPET for base-timer
Calibrating delay using timer specific routine.. 3736.65 BogoMIPS (lpj=1868329)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000940 0000c189 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
checking if image is initramfs... it is
Freeing initrd memory: 3160k freed
ACPI: Core revision 20060707
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
ACPI Warning (utinit-0077): Invalid FADT value PM2_CNT_LEN=0 at offset 5A FADT=cf7ba780 [20060707]
CPU0: Intel(R) Core(TM) Duo CPU T2350 @ 1.86GHz stepping 0c
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3733.50 BogoMIPS (lpj=1866751)
CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000940 0000c189 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM) Duo CPU T2350 @ 1.86GHz stepping 0c
Total of 2 processors activated (7470.16 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
migration_cost=47
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #05 (-#08) is hidden behind transparent bridge #04 (-#05) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: Embedded Controller [EC] (gpe 25) interrupt mode.
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: d000-dfff
MEM window: fe200000-fe2fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bus 5, cardbus bridge: 0000:04:04.0
IO window: 0000e000-0000e0ff
IO window: 0000e400-0000e4ff
PREFETCH window: fc000000-fdffffff
MEM window: 22000000-23ffffff
PCI: Bridge: 0000:00:1e.0
IO window: e000-efff
MEM window: fe300000-febfffff
PREFETCH window: fc000000-fdffffff
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:04:04.0[A] -> GSI 16 (level, low) -> IRQ 169
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
Machine check exception polling timer started.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
audit(1185591746.951:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 3.1 (2006/08/19) Phillip Lougher
SGI XFS with ACLs, security attributes, no debug enabled
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
vesafb: Intel Corporation, Intel(r) 82945GM Chipset Family Graphics Controller, Hardware Version 0.0 (OEM: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS)
vesafb: VBE version: 3.0
vesafb: VBIOS/hardware supports DDC2 transfers
vesafb: monitor limits: vf = 60 Hz, hf = 49 kHz, clk = 68 MHz
vesafb: using default BIOS refresh rate
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 128x48
fbsplash: console 0 using theme 'pardus'
fbsplash: switched splash state to 'on' on console 0
vesafb: framebuffer at 0xd0000000, mapped to 0xd0080000, using 7872k, total 7872k
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Lid Switch [LID0]
ACPI: Power Button (CM) [PWRB]
ACPI: Video Device [IGFX] (multi-head: yes rom: no post: no)
Using specific hotkey driver
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU1PM] [20060707]
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU2PM] [20060707]
ACPI: CPU1 (power states: C1[C1] C2[C2])
ACPI: Thermal Zone [THRM] (56 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
input: Macintosh mouse button emulation as /class/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0: I/O resource 0x1F0-0x1F7 not free.
ide0: ports already in use, skipping probe
ide1: I/O resource 0x170-0x177 not free.
ide1: ports already in use, skipping probe
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input1
input: AT Translated Set 2 keyboard as /class/input/input2
NET: Registered protocol family 1
Using IPI No-Shortcut mode
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 1308k freed
Time: tsc clocksource has been installed.
Time: hpet clocksource has been installed.
SCSI subsystem initialized
libata version 2.00 loaded.
ata_piix 0000:00:1f.2: version 2.00
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xFFA0 irq 14
scsi0 : ata_piix
ata1.00: ATA-8, max UDMA/100, 156301488 sectors: LBA48 NCQ (depth 0/32)
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/100
Vendor: ATA Model: FUJITSU MHW2080B Rev: 0000
Type: Direct-Access ANSI SCSI revision: 05
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xFFA8 irq 15
scsi1 : ata_piix
ata2.01: ATAPI, max UDMA/33
ata2.01: configured for UDMA/33
Vendor: HL-DT-ST Model: DVDRAM GSA-T20N Rev: WA03
Type: CD-ROM ANSI SCSI revision: 05
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 233, io mem 0xfe137c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.18.8-86 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
input: ImPS/2 Logitech Wheel Mouse as /class/input/input3
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 233, io base 0x0000c880
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.18.8-86 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 225, io base 0x0000c800
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.18.8-86 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 185, io base 0x0000c480
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.18.8-86 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-6: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000c400
usb usb5: new device found, idVendor=0000, idProduct=0000
usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.18.8-86 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ieee1394: Initialized config rom entry `ip1394'
ACPI: PCI Interrupt 0000:04:04.4[A] -> GSI 16 (level, low) -> IRQ 169
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[169] MMIO=[fe3fd000-fe3fd7ff] Max Packet=[2048] IR/IT contexts=[8/8]
usb 1-6: new device found, idVendor=0db0, idProduct=6877
usb 1-6: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-6: Product: 802.11 bg WLAN
usb 1-6: Manufacturer: Ralink
usb 1-6: configuration #1 chosen from 1 choice
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 < sda5 sda6 >
sd 0:0:0:0: Attached scsi disk sda
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:1:0: Attached scsi CD-ROM sr0
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
input: ImPS/2 Logitech Wheel Mouse as /class/input/input4
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00dc1000244c1d01]
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1052216k swap on /dev/sda5. Priority:-1 extents:1 across:1052216k
rtusb init ====>
idVendor = 0xdb0, idProduct = 0x6877
usbcore: registered new driver rt73
sdhci: Secure Digital Host Controller Interface driver, 0.12
sdhci: Copyright(c) Pierre Ossman
sdhci: SDHCI controller found at 0000:04:04.2 [1217:7120] (rev 1)
ACPI: PCI Interrupt 0000:04:04.2[A] -> GSI 16 (level, low) -> IRQ 169
sdhci:slot0: Unknown controller version (16). You may experience problems.
mmc0: SDHCI at 0xfe3ffc00 irq 169 PIO
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 945GM Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0xd0000000
intel_rng: FWH not detected
ts: Compaq touchscreen protocol output
Yenta: CardBus bridge found at 0000:04:04.0 [1462:3f03]
Yenta O2: res at 0x94/0xD4: 00/ea
Yenta O2: enabling read prefetch/write burst
Yenta: ISA IRQ mask 0x04b8, PCI irq 169
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#04) from #05 to #08
pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff
cs: IO port probe 0xe000-0xefff: clean.
pcmcia: parent PCI bridge Memory window: 0xfe300000 - 0xfebfffff
pcmcia: parent PCI bridge Memory window: 0xfc000000 - 0xfdffffff
fbsplash: switched splash state to 'off' on console 0
fbsplash: console 0 using theme 'pardus'
fbsplash: switched splash state to 'on' on console 0
fbsplash: console 1 using theme 'pardus'
fbsplash: switched splash state to 'on' on console 1
r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:02:00.0 to 64
eth0: RTL8168b/8111b at 0xd0c8a000, 00:19:db:3b:d1:d7, IRQ 177
fbsplash: console 2 using theme 'pardus'
fbsplash: switched splash state to 'on' on console 2
fbsplash: console 3 using theme 'pardus'
fbsplash: switched splash state to 'on' on console 3
fbsplash: console 4 using theme 'pardus'
fbsplash: switched splash state to 'on' on console 4
fbsplash: console 5 using theme 'pardus'
fbsplash: switched splash state to 'on' on console 5
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1b.0 to 64
cs: IO port probe 0x100-0x3af: excluding 0x370-0x377
cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x480-0x4bf 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: excluding 0x820-0x87f
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 225
NET: Registered protocol family 17
r8169: eth0: link down
r8169: eth0: link down
r8169: eth0: link up
rt73 driver version - 1.0.3.6 CVS
IA-32 Microcode Update Driver: v1.14a <tigran at veritas.com>
***rt73***: Interface goes up for the first time, activating permanent MAC
***rt73***: Active MAC is: 00:19:db:0d:53:a8.
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
[drm] Initialized i915 1.5.0 20060119 on minor 0
psmouse.c: Wheel Mouse at isa0060/serio2/input0 lost synchronization, throwing 1 bytes away.
video bus notify
video bus notify
atkbd.c: Unknown key pressed (translated set 2, code 0xe4 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e064 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xe4 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e064 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xe4 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e064 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xe4 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e064 <keycode>' to make it known.
BUG: warning at kernel/cpu.c:51/unlock_cpu_hotplug()
[<b0134c15>] unlock_cpu_hotplug+0x2c/0x54
[<d0c5030d>] do_dbs_timer+0x35/0x69 [cpufreq_ondemand]
[<b012c8ae>] run_workqueue+0x7f/0xb4
[<d0c502d8>] do_dbs_timer+0x0/0x69 [cpufreq_ondemand]
[<b012c9e9>] worker_thread+0x106/0x138
[<b0119490>] default_wake_function+0x0/0xc
[<b0119490>] default_wake_function+0x0/0xc
[<b012c8e3>] worker_thread+0x0/0x138
[<b012f440>] kthread+0x7d/0xa1
[<b012f3c3>] kthread+0x0/0xa1
[<b01013a5>] kernel_thread_helper+0x5/0xb
Pardus-kullanicilari mesaj listesiyle ilgili
daha fazla bilgi