[Pardus-kullanicilari] Pardus Beta 2007 ADSL internet bağlantısı kurulumu?
UGURFIRAT
ugurfirat at sunobis.com
16 Kas 2006 Per 20:45:35 EET
16 Kas 2006 Per 20:42 , Ismail Donmez :
>16 Kas 2006 Per 20:26 tarihinde, UGURFIRAT şunları yazmıştı:
>[...]
>
>> Pikatel USB
>> Zoom USB
>>
>> her ikisinde de sorun aynı
>>
>> IBM ugur # lsusb
>> Bus 002 Device 001: ID 0000:0000
>> Bus 003 Device 001: ID 0000:0000
>> Bus 003 Device 002: ID 0fe8:8102
>> Bus 003 Device 003: ID 06a2:0033 Topro Technology, Inc.
>> Bus 001 Device 001: ID 0000:0000
>> Bus 004 Device 001: ID 0000:0000
>>
>>
>> bide bişe ifade edermi bilmiyorum ama
>>
>> IBM ugur # eciadsl-start
>> Warning: couldn't find /etc/eciadsl/eciadsl.conf, default config assumed
>> [EciAdsl 1/5] Setting up USB support...
>> Preliminary USB device filesystem is OK
>> [EciAdsl 2/5] Uploading firmware...
>> ERROR: modem not found
>
>eciadsl çok çok sorunlu bir sürücü çalışmıyor doğru dürüst ama Zoom
> modemin sorunsuz desteklenmesi lazım, onun usb id'si ne acaba?
>
>Bi de Zoom modem takılıyken dmesg > dmesg.txt deyip dmesg.txt'i
> gönderirseniz iyi olur.
>
>/ismail
>_______________________________________________
>Pardus-kullanicilari mailing list
>Pardus-kullanicilari at uludag.org.tr
>http://liste.uludag.org.tr/mailman/listinfo/pardus-kullanicilari
dmesg cıktısı ektedir
ayrıca
http://rafb.net/paste/results/huhdv048.html
-------------- sonraki bölüm --------------
Linux version 2.6.18.1-57 (pardus at buildfarm) (gcc version 3.4.6) #2 SMP Sat Oct 14 16:04:44 EEST 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001f6e0000 (usable)
BIOS-e820: 000000001f6e0000 - 000000001f6f7000 (ACPI data)
BIOS-e820: 000000001f6f7000 - 000000001f6f9000 (ACPI NVS)
BIOS-e820: 000000001f700000 - 0000000020000000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
502MB LOWMEM available.
On node 0 totalpages: 128736
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 124640 pages, LIFO batch:31
DMI present.
IO/L-APIC allowed because system is MP or new enough
ACPI: RSDP (v002 IBM ) @ 0x000f6ec0
ACPI: XSDT (v001 IBM TP-1W 0x00002020 LTP 0x00000000) @ 0x1f6ef33d
ACPI: FADT (v003 IBM TP-1W 0x00002020 IBM 0x00000001) @ 0x1f6ef400
ACPI: SSDT (v001 IBM TP-1W 0x00002020 MSFT 0x0100000e) @ 0x1f6ef5b4
ACPI: ECDT (v001 IBM TP-1W 0x00002020 IBM 0x00000001) @ 0x1f6f6e4c
ACPI: TCPA (v001 IBM TP-1W 0x00002020 PTL 0x00000001) @ 0x1f6f6e9e
ACPI: BOOT (v001 IBM TP-1W 0x00002020 LTP 0x00000001) @ 0x1f6f6fd8
ACPI: DSDT (v001 IBM TP-1W 0x00002020 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
Allocating PCI resources starting at 30000000 (gap: 20000000:df800000)
Detected 1594.909 MHz processor.
Built 1 zonelists. Total pages: 128736
Kernel command line: root=/dev/hda6 video=vesafb:nomtrr,pmipal,ywrap,1024x768-32 at 60 splash=silent,theme:pardus console=tty2 mudur=language:tr quiet
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (013fa000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 502860k/514944k available (2413k kernel code, 11508k reserved, 813k data, 1236k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3190.64 BogoMIPS (lpj=1595322)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
CPU: After vendor identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9f9bf 00000000 00000000 00000040 00000180 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
checking if image is initramfs... it is
Freeing initrd memory: 2243k freed
ACPI: Core revision 20060707
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
ACPI: setting ELCR to 0200 (from 0800)
CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 06
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
migration_cost=0
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd8c6, last bus=5
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Found ECDT
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC] (gpe 28) interrupt mode.
ACPI: Power Resource [PUBS] (on)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bus 3, cardbus bridge: 0000:02:00.0
IO window: 00003000-000030ff
IO window: 00003400-000034ff
PREFETCH window: f0000000-f1ffffff
MEM window: d2000000-d3ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 3000-6fff
MEM window: d0200000-dfffffff
PREFETCH window: f0000000-f7ffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
Simple Boot Flag at 0x35 set to 0x1
Machine check exception polling timer started.
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1163699669.708:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 3.1 (2006/08/19) Phillip Lougher
SGI XFS with ACLs, security attributes, no debug enabled
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Real Time Clock Driver v1.12ac
vesafb: Intel Corporation, Intel(r)852GM/852GME/855GM/855GME Graphics Controller, Hardware Version 0.0 (OEM: Intel(r)852GM/852GME/855GM/855GME Graphics Chip Accelerated VGA BIOS)
vesafb: VBE version: 3.0
vesafb: VBIOS/hardware doesn't support DDC transfers
vesafb: no monitor limits have been set
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 128x48
fbsplash: console 0 using theme 'pardus'
fbsplash: switched splash state to 'on' on console 0
vesafb: framebuffer at 0xe0000000, mapped to 0xd0080000, using 6144k, total 8000k
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
input: Macintosh mouse button emulation as /class/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1818-0x181f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: HTS424040M9AT00, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HL-DT-STCD-RW/DVD DRIVE GCC-4241N, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB) w/1739KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 hda7 >
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input1
input: AT Translated Set 2 keyboard as /class/input/input2
NET: Registered protocol family 1
Using IPI No-Shortcut mode
ACPI: (supports S0 S3 S4 S5)
Time: tsc clocksource has been installed.
Freeing unused kernel memory: 1236k freed
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xd0100000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.18.1-57 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001820
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.18.1-57 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001840
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.18.1-57 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001860
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.18.1-57 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input3
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
usb 3-1: new full speed USB device using uhci_hcd and address 2
usb 3-1: new device found, idVendor=0fe8, idProduct=8102
usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: USB-ADSL Modem
usb 3-1: Manufacturer: GlobeSpan Inc.
usb 3-1: SerialNumber: UADSLG
usb 3-1: configuration #1 chosen from 1 choice
usb 3-2: new low speed USB device using uhci_hcd and address 3
usb 3-2: new device found, idVendor=06a2, idProduct=0033
usb 3-2: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: USB Mouse
usb 3-2: Manufacturer: Topro
usb 3-2: configuration #1 chosen from 1 choice
parport: PnPBIOS parport detected.
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on hda6, internal journal
Adding 562232k swap on /dev/hda7. Priority:-1 extents:1 across:562232k
PCI: Enabling device 0000:00:1f.6 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.6 to 64
ALSA /var/tmp/pisi/alsa-driver-1.0.13-14/work/alsa-driver-1.0.13/pci/ac97/ac97_codec.c:2136: MC'97 1 converters and GPIO not ready (0xff00)
usbcore: registered new driver hiddev
input: Topro USB Mouse as /class/input/input4
input: USB HID v1.10 Mouse [Topro USB Mouse] on usb-0000:00:1d.1-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
ts: Compaq touchscreen protocol output
i8xx TCO timer: initialized (0x1060). heartbeat=30 sec (nowayout=0)
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 855 Chipset.
agpgart: Detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0xe0000000
Intel 82802 RNG detected
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU] (supports 8 throttling states)
Time: acpi_pm clocksource has been installed.
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.5 to 64
ALSA /var/tmp/pisi/alsa-driver-1.0.13-14/work/alsa-driver-1.0.13/pci/ac97/ac97_codec.c:2104: AC'97 0 analog subsections not ready
intel8x0_measure_ac97_clock: measured 50461 usecs
intel8x0: clocking to 48000
Yenta: CardBus bridge found at 0000:02:00.0 [1014:0512]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:00.0, mfunc 0x01d21022, devctl 0x64
Yenta: ISA IRQ mask 0x0478, PCI irq 11
Socket status: 30000020
pcmcia: parent PCI bridge I/O window: 0x3000 - 0x6fff
cs: IO port probe 0x3000-0x6fff: clean.
pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff
pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno at linux.intel.com>
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.2kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
pccard: CardBus card inserted into slot 0
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
8139too Fast Ethernet driver 0.9.27
PCI: Enabling device 0000:03:00.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:03:00.0 to 64
eth1: RealTek RTL8139 at 0xd0a5c000, 00:02:44:b3:25:e9, IRQ 11
eth1: Identified 8139 chip type 'RTL-8139C'
hsfengine: module license 'see LICENSE file distributed with driver' taints kernel.
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
eth1 renamed to eth1_rename
ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
fbsplash: switched splash state to 'off' on console 0
fbsplash: console 0 using theme 'pardus'
fbsplash: switched splash state to 'on' on console 0
fbsplash: console 1 using theme 'pardus'
fbsplash: switched splash state to 'on' on console 1
fbsplash: console 2 using theme 'pardus'
fbsplash: switched splash state to 'on' on console 2
fbsplash: console 3 using theme 'pardus'
fbsplash: switched splash state to 'on' on console 3
fbsplash: console 4 using theme 'pardus'
fbsplash: switched splash state to 'on' on console 4
fbsplash: console 5 using theme 'pardus'
fbsplash: switched splash state to 'on' on console 5
NET: Registered protocol family 17
eth1_rename: link up, 100Mbps, full-duplex, lpa 0x41E1
eth0: NETDEV_TX_BUSY returned; driver should report queue full via ieee_device->is_queue_full.
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
Using specific hotkey driver
ACPI: Thermal Zone [THM0] (60 C)
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
Using specific hotkey driver
Using specific hotkey driver
Using specific hotkey driver
Using specific hotkey driver
ip_tables: (C) 2000-2006 Netfilter Core Team
Using specific hotkey driver
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (4023 buckets, 32184 max) - 228 bytes per conntrack
HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
N_HDLC line discipline registered.
Using specific hotkey driver
Using specific hotkey driver
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized i915 1.5.0 20060119 on minor 0
[drm] Initialized i915 1.5.0 20060119 on minor 1
eth1_rename: link up, 100Mbps, full-duplex, lpa 0x41E1
eth1_rename: link up, 100Mbps, full-duplex, lpa 0x41E1
NET: Registered protocol family 8
NET: Registered protocol family 20
br2684_create: register_netdev failed
br2684_create: register_netdev failed
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
br2684_create: register_netdev failed
br2684_create: register_netdev failed
br2684_create: register_netdev failed
usb 3-1: USB disconnect, address 2
usb 3-1: new full speed USB device using uhci_hcd and address 4
usb 3-1: new device found, idVendor=1803, idProduct=5510
usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: ADSL USB MODEM
usb 3-1: Manufacturer: -
usb 3-1: SerialNumber: 67882636
usb 3-1: configuration #1 chosen from 1 choice
usbcore: registered new driver cxacru
cxacru 3-1:1.0: firmware (cxacru-fw.bin) unavailable (system misconfigured?)
usb 3-2: USB disconnect, address 3
usb 3-2: new low speed USB device using uhci_hcd and address 5
usb 3-2: new device found, idVendor=06a2, idProduct=0033
usb 3-2: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: USB Mouse
usb 3-2: Manufacturer: Topro
usb 3-2: configuration #1 chosen from 1 choice
input: Topro USB Mouse as /class/input/input5
input: USB HID v1.10 Mouse [Topro USB Mouse] on usb-0000:00:1d.1-2
br2684_create: register_netdev failed
Pardus-kullanicilari mesaj listesiyle ilgili
daha fazla bilgi