[Pardus-kullanicilari] Via S3 Ekran kartı 8378 modeli ekran kartı sorunu

[teciman]

Ayrıca     dmesg    çıktısı     şöyle  ;


Linux version 2.6.16.24-49 (root at buildfarm) (gcc version 3.4.6) #2 Sat Jul 8
18:42:13 EEST 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001bff0000 (usable)
 BIOS-e820: 000000001bff0000 - 000000001bff3000 (ACPI NVS)
 BIOS-e820: 000000001bff3000 - 000000001c000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
447MB LOWMEM available.
found SMP MP-table at 000f4e60
On node 0 totalpages: 114672
  DMA zone: 4096 pages, LIFO batch:0
  DMA32 zone: 0 pages, LIFO batch:0
  Normal zone: 110576 pages, LIFO batch:31
  HighMem zone: 0 pages, LIFO batch:0
DMI 2.3 present.
IO/L-APIC allowed because system is MP or new enough
ACPI: RSDP (v000 P4M800                                ) @ 0x000f6ea0
ACPI: RSDT (v001 P4M800 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1bff3040
ACPI: FADT (v001 P4M800 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1bff30c0
ACPI: MADT (v001 P4M800 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1bff8540
ACPI: DSDT (v001 P4M800 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
I/O APIC #2 Version 17 at 0xFEC00000.
Processors: 1
Allocating PCI resources starting at 20000000 (gap: 1c000000:e2c00000)
Built 1 zonelists
Kernel command line: root=/dev/hda3 video=vesafb:off video=vga16fb:off
pci=noacpi noapic
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 2801.592 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 445012k/458688k available (2312k kernel code, 13036k reserved, 767k
data, 1196k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5609.16 BogoMIPS
(lpj=2804583)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000
0000651d 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000
0000651d 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: bfebfbff 20000000 00000000 00000180 0000651d
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
CPU0: Thermal monitoring enabled
CPU: Intel(R) Celeron(R) CPU 2.80GHz stepping 01
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 4493k freed
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb3b0, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
PCI: Using IRQ router VIA [1106/3227] at 0000:00:11.0
TC classifier action (bugs to netdev at vger.kernel.org cc hadi at cyberus.ca)
pnp: 00:02: ioport range 0x400-0x47f could not be reserved
pnp: 00:02: ioport range 0x500-0x50f has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: disabled.
  MEM window: f4000000-f5ffffff
  PREFETCH window: f0000000-f3ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
Machine check exception polling timer started.
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1162372467.518:1): initialized
squashfs: version 3.0 (2006/03/15) Phillip Lougher
SGI XFS with ACLs, security attributes, no debug enabled
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Bypassing VIA 8237 APIC De-Assert Message
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Fan [FAN] (on)
ACPI Error (acpi_processor-0488): Getting cpuindex for acpiid 0x1 [20060127]
ACPI Error (acpi_processor-0488): Getting cpuindex for acpiid 0x2 [20060127]
ACPI Error (acpi_processor-0488): Getting cpuindex for acpiid 0x3 [20060127]
ACPI: Thermal Zone [THRM] (28 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 2.6.10)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:0f.1
ACPI (acpi_bus-0199): Device is not power manageable [20060127]
PCI: VIA IRQ fixup for 0000:00:0f.1, from 255 to 0
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
    ide0: BM-DMA at 0xe600-0xe607, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xe608-0xe60f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: ST380011A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: _NEC CD-ROM CD-3002A, ATAPI CD/DVD-ROM drive
hdd: TOSHIBA CD-R/RW SRM8202C, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63,
UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 < hda5 > hda3
hdc: ATAPI 52X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 4, 65536 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ACPI wakeup devices:
SLPB PCI0 USB3 USB4 USB5 USB6 LAN0 AC97 MC97 UAR1
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 1196k freed
input: AT Translated Set 2 keyboard as /class/input/input0
SCSI subsystem initialized
libata version 1.20 loaded.
sata_via 0000:00:0f.0: version 1.1
ACPI (acpi_bus-0199): Device is not power manageable [20060127]
sata_via 0000:00:0f.0: routed to hard irq line 11
ata1: SATA max UDMA/133 cmd 0xE000 ctl 0xE102 bmdma 0xE400 irq 11
ata2: SATA max UDMA/133 cmd 0xE200 ctl 0xE302 bmdma 0xE408 irq 11
ata1: SATA link down (SStatus 0)
scsi0 : sata_via
ata2: SATA link down (SStatus 0)
scsi1 : sata_via
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3
ACPI (acpi_bus-0199): Device is not power manageable [20060127]
PCI: Found IRQ 10 for device 0000:00:10.0
PCI: Sharing IRQ 10 with 0000:00:10.1
PCI: Sharing IRQ 10 with 0000:00:12.0
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 10, io base 0x0000e700
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.16.24-49 uhci_hcd
usb usb1: SerialNumber: 0000:00:10.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI (acpi_bus-0199): Device is not power manageable [20060127]
PCI: Found IRQ 10 for device 0000:00:10.1
PCI: Sharing IRQ 10 with 0000:00:10.0
PCI: Sharing IRQ 10 with 0000:00:12.0
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.1: irq 10, io base 0x0000e800
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.16.24-49 uhci_hcd
usb usb2: SerialNumber: 0000:00:10.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI (acpi_bus-0199): Device is not power manageable [20060127]
PCI: Found IRQ 11 for device 0000:00:10.2
PCI: Sharing IRQ 11 with 0000:00:10.3
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.2: irq 11, io base 0x0000e900
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.16.24-49 uhci_hcd
usb usb3: SerialNumber: 0000:00:10.2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
input: ImPS/2 Generic Wheel Mouse as /class/input/input1
ACPI (acpi_bus-0199): Device is not power manageable [20060127]
PCI: Found IRQ 11 for device 0000:00:10.3
PCI: Sharing IRQ 11 with 0000:00:10.2
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.3: irq 11, io base 0x0000ea00
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.16.24-49 uhci_hcd
usb usb4: SerialNumber: 0000:00:10.3
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
EXT3 FS on hda3, internal journal
Adding 614392k swap on /.swap.  Priority:-1 extents:156 across:625384k
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
ACPI (acpi_bus-0199): Device is not power manageable [20060127]
PCI: Found IRQ 10 for device 0000:00:12.0
PCI: Sharing IRQ 10 with 0000:00:10.0
PCI: Sharing IRQ 10 with 0000:00:10.1
eth0: VIA Rhine II at 0x1ed00, 00:13:d3:36:a1:7f, IRQ 10.
eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA P4M800 chipset
agpgart: AGP aperture is 128M @ 0xe8000000
ACPI (acpi_bus-0199): Device is not power manageable [20060127]
PCI: Found IRQ 5 for device 0000:00:11.5
PCI: Setting latency timer of device 0000:00:11.5 to 64
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[drm] Initialized drm 1.0.1 20051102
[drm] Initialized via 2.7.4 20051116 on minor 0
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: X tried to set rate=x12. Setting to AGP3 x8 mode.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: X tried to set rate=x12. Setting to AGP3 x8 mode.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
natural at pardus ~ $



-- 
TCDD 3.Bölge Müdürlüğü
Taşınmaz Mallar Müdürlüğü
Harita Mühendisi
(232) 464 31 31/4458-4388
-------------- sonraki bölüm --------------
Bir HTML eklentisi temizlendi...
URL: http://liste.uludag.org.tr/pardus-kullanicilari/attachments/20061101/d9d5705a/attachment-0001.html