From: Ozgur KOLUKISA (ozgurkk@gmail.com)
Date: Fri 11 Nov 2005 - 15:34:01 EET
Merhabalar, ben Slackware 10.1 kullanıyorum ve ethernet kartlarıyla başım
belada.
öncelikle slackware de kurulumda varsayılan olarak sadece bir tane ethernet
kartını yüklüyor,diğer ethernet kartımı ise görebilmeme rağmen eth1 yada
başka bir isimde görünmüyor.Örnek cat /proc /pci çıktısı şöyle :
*> cat /proc/pci*
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel Corp. 82875P Memory Controller Hub (rev 2).
Prefetchable 32 bit memory at 0xe8000000 [0xefffffff].
Bus 0, device 1, function 0:
PCI bridge: Intel Corp. 82875P Processor to AGP Controller (rev 2).
Master Capable. Latency=64. Min Gnt=4.
Bus 0, device 3, function 0:
PCI bridge: Intel Corp. 82875P Processor to PCI to CSA Bridge (rev 2).
Master Capable. Latency=32. Min Gnt=4.
Bus 0, device 28, function 0:
PCI bridge: PCI device 8086:25ae (Intel Corp.) (rev 2).
Master Capable. Latency=32. Min Gnt=6.
Bus 0, device 29, function 0:
USB Controller: PCI device 8086:25a9 (Intel Corp.) (rev 2).
IRQ 7.
I/O at 0xc400 [0xc41f].
Bus 0, device 29, function 1:
USB Controller: PCI device 8086:25aa (Intel Corp.) (rev 2).
IRQ 9.
I/O at 0xc000 [0xc01f].
Bus 0, device 29, function 4:
System peripheral: PCI device 8086:25ab (Intel Corp.) (rev 2).
Non-prefetchable 32 bit memory at 0xf5000000 [0xf500000f].
Bus 0, device 29, function 5:
PIC: PCI device 8086:25ac (Intel Corp.) (rev 2).
Bus 0, device 29, function 7:
USB Controller: PCI device 8086:25ad (Intel Corp.) (rev 2).
IRQ 11.
Non-prefetchable 32 bit memory at 0xf5001000 [0xf50013ff].
Bus 0, device 30, function 0:
PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev 10).
Master Capable. No bursts. Min Gnt=14.
Bus 0, device 31, function 0:
ISA bridge: PCI device 8086:25a1 (Intel Corp.) (rev 2).
Bus 0, device 31, function 1:
IDE interface: PCI device 8086:25a2 (Intel Corp.) (rev 2).
I/O at 0xf000 [0xf00f].
Non-prefetchable 32 bit memory at 0x1ff00000 [0x1ff003ff].
Bus 0, device 31, function 3:
SMBus: PCI device 8086:25a4 (Intel Corp.) (rev 2).
IRQ 11.
I/O at 0x500 [0x51f].
Bus 2, device 1, function 0:
Ethernet controller: PCI device 8086:1075 (Intel Corp.) (rev 0).
IRQ 10.
Master Capable. No bursts. Min Gnt=255.
Non-prefetchable 32 bit memory at 0xf1020000 [0xf103ffff].
Non-prefetchable 32 bit memory at 0xf1000000 [0xf101ffff].
I/O at 0xa000 [0xa01f].
Bus 4, device 4, function 0:
RAID bus controller: PCI device 105a:3319 (Promise Technology,
Inc.) (rev 2).
IRQ 11.
Master Capable. Latency=96. Min Gnt=4.Max Lat=18.
I/O at 0xb000 [0xb03f].
I/O at 0xb400 [0xb40f].
I/O at 0xb800 [0xb87f].
Non-prefetchable 32 bit memory at 0xf3020000 [0xf3020fff].
Non-prefetchable 32 bit memory at 0xf3000000 [0xf301ffff].
Bus 4, device 9, function 0:
VGA compatible controller: Cirrus Logic GD 5446 (rev 0).
Prefetchable 32 bit memory at 0xf4000000 [0xf4ffffff].
Bus 4, device 10, function 0:
Ethernet controller: VIA Technologies, Inc. VT6105 [Rhine-III] (rev 134).
IRQ 5.
Master Capable. Latency=32. Min Gnt=3.Max Lat=8.
I/O at 0xbc00 [0xbcff].
Non-prefetchable 32 bit memory at 0xf3021000 [0xf30210ff].
sadece onboard via ethernet çalışıyor..Diğerini belgeler org da
olduğu gibi lilo'ya ekledim ama çalışmadı..ikinci kartı nasıl
tanıtırım.. (ikinci kart pci Realtek 8139 serisi bir kart )
2. sorunum yine ethernetle ilgili.. Sisteme webmin kurduktan sonra
(son sürüm) ethernet kartlarım başlangıçta yüklenmiyor.Hatta loopback
interface bile. Bunlara tekrar IP adresi vererek başlatıyorum..Bu
sorunun çözümü nedir.
_______________________________________________
Linux-donanim mailing list
Linux-donanim@liste.linux.org.tr
http://liste.linux.org.tr/mailman/listinfo/linux-donanim