[Gelistirici] Vaio fonksiyon tuşları , parmak izi okuyucu ve bazı sorunlar...
Mehmet Nur Olcay
mnurolcay at gmail.com
9 Oca 2009 Cum 23:27:43 EET
On Friday 09 January 2009 23:03:10 Onur Küçük wrote:
> işlemciyi yükü ne durumda oluyor fanlar çalışırken ?
Fanlar hiç durmuyor ki, nadiren ve çok kısa süreli durduğuna şahit oluyorum
şans eseri. Örneğin şu anda %15-25 arasında değişiyor işlemci kullanımı.
> dmesg de bu konuda bilgi var mı,
PCI: Enabling device 0000:00:1c.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
gibi hatalar görünüyor ama çok anlamıyorum doğrusu. dmesg çıktısı ekte
> BIOS güncellemesi yaptın mı,
Geldiği gibi duruyor, herhangi bir güncelleme yapmadım. Bir hafta oldu zaten
geleli.
> farklı
> cpufreq modülleri ile denedin mi ?
Henüz farklı birşey denemedim, 2008.1 kurdum, kde4 yükledim, test deposu
kullanıyorum ve herşey default ayarlarla duruyor.
--
Mehmet Nur Olcay
-------------- sonraki bölüm --------------
Bir HTML eklentisi temizlendi...
URL: <http://liste.pardus.org.tr/gelistirici/attachments/20090109/a0219473/attachment-0002.htm>
-------------- sonraki bölüm --------------
Linux version 2.6.25.20-114 (pardus at buildfarm) (gcc version 4.3.2 (Pardus Linux) ) #1 SMP Mon Dec 29 14:55:26 EET 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bbb6c000 (usable)
BIOS-e820: 00000000bbb6c000 - 00000000bbbbf000 (reserved)
BIOS-e820: 00000000bbbbf000 - 00000000bbc82000 (usable)
BIOS-e820: 00000000bbc82000 - 00000000bbcbf000 (ACPI NVS)
BIOS-e820: 00000000bbcbf000 - 00000000bbcec000 (usable)
BIOS-e820: 00000000bbcec000 - 00000000bbcff000 (ACPI data)
BIOS-e820: 00000000bbcff000 - 00000000bbd00000 (usable)
BIOS-e820: 00000000bbd00000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
2109MB HIGHMEM available.
896MB LOWMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Entering add_active_range(0, 0, 769280) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 769280
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 769280
On node 0 totalpages: 769280
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 4218 pages used for memmap
HighMem zone: 535686 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI 2.4 present.
ACPI: RSDP 000FE020, 0024 (r2 Sony)
ACPI: XSDT BBCFE120, 0064 (r1 Sony VAIO 20080813 1000013)
ACPI: FACP BBCFD000, 00F4 (r4 Sony VAIO 20080813 Sony 1000000)
ACPI: DSDT BBCEF000, 92C3 (r1 Sony VAIO 20080813 Sony 1000000)
ACPI: FACS BBC8F000, 0040
ACPI: HPET BBCFC000, 0038 (r1 Sony VAIO 20080813 Sony 1000000)
ACPI: APIC BBCFB000, 006C (r2 Sony VAIO 20080813 Sony 1000000)
ACPI: MCFG BBCFA000, 003C (r1 Sony VAIO 20080813 Sony 1000000)
ACPI: ASF! BBCF9000, 00A5 (r32 Sony VAIO 20080813 Sony 1000000)
ACPI: SLIC BBCEE000, 0176 (r1 Sony VAIO 20080813 Sony 1000000)
ACPI: BOOT BBCED000, 0028 (r1 Sony VAIO 20080813 Sony 1000000)
ACPI: SSDT BBCEC000, 0655 (r1 Sony VAIO 20080813 INTL 20051117)
ACPI: DMI detected: Sony
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 7:7 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 7:7 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c4000000 (gap: c0000000:38000000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 763270
Kernel command line: root=LABEL=PARDUS_ROOT vga=791 splash=silent quiet
bootsplash: silent mode.
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2527.087 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3040464k/3077120k available (1917k kernel code, 34748k reserved, 1023k data, 264k init, 2158964k highmem)
virtual kernel memory layout:
fixmap : 0xffe14000 - 0xfffff000 (1964 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc03e6000 - 0xc0428000 ( 264 kB)
.data : 0xc02df6ab - 0xc03df67c (1023 kB)
.text : 0xc0100000 - 0xc02df6ab (1917 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
hpet clockevent registered
Calibrating delay using timer specific routine.. 5057.27 BogoMIPS (lpj=2528637)
Security Framework initialized
AppArmor: AppArmor initialized <NULL>
AppArmor: Registered secondary security module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
CPU0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 1/1 ip 4000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5054.01 BogoMIPS (lpj=2527009)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06
Total of 2 processors activated (10111.29 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
APIC calibration not consistent with PM Timer: 101ms instead of 100ms
APIC delta adjusted to PM-Timer: 1662500 (1695732)
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
CPU0 attaching sched-domain:
domain 0: span 00000003
groups: 00000001 00000002
CPU1 attaching sched-domain:
domain 0: span 00000003
groups: 00000002 00000001
net_namespace: 548 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored via DMI
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 64-bit timers, 14318180 Hz
AppArmor: AppArmor Filesystem Enabled
ACPI: RTC can wake from S4
Switched to high resolution mode on CPU 0
system 00:01: ioport range 0x164e-0x164f has been reserved
system 00:01: ioport range 0x600-0x60f has been reserved
system 00:01: ioport range 0x610-0x610 has been reserved
system 00:01: ioport range 0x800-0x80f has been reserved
system 00:01: ioport range 0x810-0x817 has been reserved
system 00:01: ioport range 0x820-0x823 has been reserved
system 00:01: ioport range 0x400-0x47f has been reserved
system 00:01: ioport range 0x500-0x53f has been reserved
system 00:01: iomem range 0xf8000000-0xfbffffff could not be reserved
system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
system 00:01: iomem range 0xfed10000-0xfed13fff could not be reserved
system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
Switched to high resolution mode on CPU 1
PCI: Bridge: 0000:00:1c.0
IO window: 5000-5fff
MEM window: 0xd9a00000-0xda9fffff
PREFETCH window: 0x00000000d4800000-0x00000000d57fffff
PCI: Bridge: 0000:00:1c.2
IO window: 4000-4fff
MEM window: 0xd8900000-0xd99fffff
PREFETCH window: 0x00000000d5800000-0x00000000d67fffff
PCI: Bridge: 0000:00:1c.3
IO window: 3000-3fff
MEM window: 0xd7900000-0xd88fffff
PREFETCH window: 0x00000000d6800000-0x00000000d77fffff
PCI: Bus 2, cardbus bridge: 0000:01:07.0
IO window: 0x00002000-0x000020ff
IO window: 0x00002400-0x000024ff
PREFETCH window: 0xdc000000-0xdfffffff
MEM window: 0xe0000000-0xe3ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 2000-2fff
MEM window: 0xd2000000-0xd40fffff
PREFETCH window: 0x00000000d0000000-0x00000000d1ffffff
PCI: Enabling device 0000:00:1c.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Enabling device 0000:00:1c.3 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1c.3 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:01:07.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:01:07.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Unpacking initramfs... done
Freeing initrd memory: 5987k freed
Simple Boot Flag value 0x5 read from CMOS RAM was invalid
Simple Boot Flag at 0x44 set to 0x1
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
type=2000 audit(1231537184.922:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
Allocate Port Service[0000:00:1c.2:pcie03]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
Allocate Port Service[0000:00:1c.3:pcie03]
vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 6144k, total 65472k
vesafb: mode is 1024x768x16, linelength=2048, pages=41
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: silentjpeg size 208756 bytes
bootsplash: ...found (1024x768, 133910 bytes, v3).
Console: switching to colour frame buffer device 128x45
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
hpet_resources: 0xfed00000 is busy
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
floppy0: no floppy controllers found
loop: module loaded
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
input: PC Speaker as /devices/platform/pcspkr/input/input1
Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04711/0xa04000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
cpuidle: using governor ladder
cpuidle: using governor menu
NET: Registered protocol family 1
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 264k freed
Write protecting the kernel read-only data: 836k
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: PCI Interrupt 0000:00:1a.7[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 19, io mem 0xdaa25400
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.25.20-114 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdaa25000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.25.20-114 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
ACPI: ACPI Dock Station Driver
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ACPI: PCI interrupt for device 0000:00:1f.2 disabled
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.5 to 64
ACPI: PCI interrupt for device 0000:00:1f.5 disabled
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x000060c0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 1-0:1.0: unable to enumerate USB device on port 1
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.25.20-114 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x000060a0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.25.20-114 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00006080
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-2: new high speed USB device using ehci_hcd and address 3
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.25.20-114 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00006060
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb 1-2: configuration #1 chosen from 1 choice
usb 1-2: New USB device found, idVendor=05ca, idProduct=183f
usb 1-2: New USB device strings: Mfr=1, Product=0, SerialNumber=0
usb 1-2: Manufacturer: Ricoh co. Ltd.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.25.20-114 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
ACPI: PCI Interrupt 0000:00:1d.2[D] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 16, io base 0x00006040
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.25.20-114 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
ACPI: PCI Interrupt 0000:00:1d.3[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.3: irq 18, io base 0x00006020
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
hub 2-0:1.0: unable to enumerate USB device on port 3
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.25.20-114 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.3
ACPI: PCI Interrupt 0000:01:07.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:01:07.1 to 64
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21] MMIO=[d4001000-d40017ff] Max Packet=[2048] IR/IT contexts=[4/4]
ata_piix 0000:00:1f.2: version 2.12
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x6158 ctl 0x6174 bmdma 0x6130 irq 19
ata2: SATA max UDMA/133 cmd 0x6150 ctl 0x6170 bmdma 0x6138 irq 19
ata1: link in powersave mode (ipm=6), forcing hardreset
hub 2-0:1.0: unable to enumerate USB device on port 5
usb 3-1: new full speed USB device using uhci_hcd and address 2
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: FUJITSU MHY2250BH, 0000000B, max UDMA/100
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: New USB device found, idVendor=147e, idProduct=1000
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: Fingerprint Sensor
usb 3-1: Manufacturer: TouchStrip
usb 6-1: new low speed USB device using uhci_hcd and address 2
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
usb 6-1: configuration #1 chosen from 1 choice
usb 6-1: New USB device found, idVendor=04d9, idProduct=0499
usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
ata2.00: ATAPI: MATSHITADVD-RAM UJ870BJ, 1.02, max UDMA/33
usb 7-1: new full speed USB device using uhci_hcd and address 2
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA FUJITSU MHY2250B 0000 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ870BJ 1.02 PQ: 0 ANSI: 5
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460304cf2968]
usb 7-1: configuration #1 chosen from 1 choice
usb 7-1: New USB device found, idVendor=044e, idProduct=3017
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 7-1: Product: BCM2046 Bluetooth Device
usb 7-1: Manufacturer: Broadcom Corp
usb 7-1: SerialNumber: 001E3DEBB6DA
PCI: Setting latency timer of device 0000:00:1f.5 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x6148 ctl 0x616c bmdma 0x6110 irq 19
ata4: SATA max UDMA/133 cmd 0x6140 ctl 0x6168 bmdma 0x6118 irq 19
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
usbcore: registered new interface driver hiddev
input: HID 04d9:0499 as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input3
input,hidraw0: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:1d.1-1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
udevd version 126 started
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
ACPI: Power Button (CM) [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
ACPI: Lid Switch [LID0]
sony-laptop: Sony Notebook Control Driver v0.6.
input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/SNY5001:00/input/input7
input: Sony Vaio Jogdial as /devices/virtual/input/input8
Linux agpgart interface v0.103
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
ACPI: AC Adapter [AC] (on-line)
iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.3.27ks
iwl4965: Copyright(c) 2003-2008 Intel Corporation
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:04:00.0 to 64
iwl4965: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
iwl4965: Tunable channels: 13 802.11bg, 24 802.11a channels
ACPI: PCI interrupt for device 0000:04:00.0 disabled
phy0: Selected rate control algorithm 'iwl-4965-rs'
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183f)
uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
input: UVC Camera (05ca:183f) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input9
usbcore: registered new interface driver uvcvideo
USB Video Class driver (SVN r262)
tpm_inf_pnp 00:08: Found TPM with ID IFX0102
ACPI: SSDT BBB77C18, 0265 (r1 Sony VAIO 20080813 INTL 20051117)
ACPI: SSDT BBB75618, 05B3 (r1 Sony VAIO 20080813 INTL 20051117)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT BBB76E18, 01CF (r1 Sony VAIO 20080813 INTL 20051117)
ACPI: SSDT BBB77F18, 008D (r1 Sony VAIO 20080813 INTL 20051117)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:01 is registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci: SDHCI controller found at 0000:01:07.2 [1180:0822] (rev 21)
ACPI: PCI Interrupt 0000:01:07.2[C] -> GSI 22 (level, low) -> IRQ 22
sdhc0:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
PCI: Setting latency timer of device 0000:01:07.2 to 64
mmc0: SDHCI at 0xd4001900 irq 22 DMA
Marking TSC unstable due to: TSC halts in idle.
ACPI: Battery Slot [BAT1] (battery present)
ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
agpgart: Detected an Intel Intel Integrated Graphics Device Chipset.
agpgart: Detected 65020K stolen memory.
agpgart: AGP aperture is 256M @ 0xc0000000
Yenta: CardBus bridge found at 0000:01:07.0 [104d:903b]
[drm] Initialized drm 1.1.0 20060810
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THRM] (42 C)
ACPI: device:04 is registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input10
ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
Yenta: ISA IRQ mask 0x0cb8, PCI irq 20
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#01) from #02 to #03
pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
cs: IO port probe 0x2000-0x2fff: clean.
pcmcia: parent PCI bridge Memory window: 0xd2000000 - 0xd40fffff
pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd1ffffff
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
[drm] Initialized i915 1.12.0 20071122 on minor 0
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: Unknown model for ALC262, trying auto-probe from BIOS...
EXT3 FS on sda6, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.9)
Adding 307192k swap on /.swap. Priority:-1 extents:78 across:315692k
Clocksource tsc unstable (delta = -85843518 ns)
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 100002, writing 100006)
Registered led device: iwl-phy0:radio
Registered led device: iwl-phy0:assoc
Registered led device: iwl-phy0:RX
Registered led device: iwl-phy0:TX
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
IA-32 Microcode Update Driver: v1.14a <tigran at aivazian.fsnet.co.uk>
bootsplash: status on console 0 changed to on
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): wlan0: link is not ready
NET: Registered protocol family 17
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticated
wlan0: associate with AP 00:1d:19:13:d0:0d
wlan0: RX AssocResp from 00:1d:19:13:d0:0d (capab=0x471 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
set status page addr 0x03fff000
wlan0: no IPv6 routers present
wlan0: deauthenticated
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticated
wlan0: associate with AP 00:1d:19:13:d0:0d
wlan0: RX ReassocResp from 00:1d:19:13:d0:0d (capab=0x471 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticated
wlan0: associate with AP 00:1d:19:13:d0:0d
wlan0: RX ReassocResp from 00:1d:19:13:d0:0d (capab=0x471 status=0 aid=1)
wlan0: associated
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 00000003
groups: 00000001 00000002
domain 1: span 00000003
groups: 00000003
CPU1 attaching sched-domain:
domain 0: span 00000003
groups: 00000002 00000001
domain 1: span 00000003
groups: 00000003
wlan0: deauthenticated
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authentication with AP 00:1d:19:13:d0:0d timed out
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticated
wlan0: associate with AP 00:1d:19:13:d0:0d
wlan0: associate with AP 00:1d:19:13:d0:0d
wlan0: RX ReassocResp from 00:1d:19:13:d0:0d (capab=0x471 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticated
wlan0: associate with AP 00:1d:19:13:d0:0d
wlan0: RX ReassocResp from 00:1d:19:13:d0:0d (capab=0x471 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticated
wlan0: associate with AP 00:1d:19:13:d0:0d
wlan0: RX ReassocResp from 00:1d:19:13:d0:0d (capab=0x471 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticated
wlan0: associate with AP 00:1d:19:13:d0:0d
wlan0: RX ReassocResp from 00:1d:19:13:d0:0d (capab=0x471 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticated
wlan0: associate with AP 00:1d:19:13:d0:0d
wlan0: RX ReassocResp from 00:1d:19:13:d0:0d (capab=0x471 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticated
wlan0: associate with AP 00:1d:19:13:d0:0d
wlan0: RX ReassocResp from 00:1d:19:13:d0:0d (capab=0x471 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticated
wlan0: associate with AP 00:1d:19:13:d0:0d
wlan0: RX ReassocResp from 00:1d:19:13:d0:0d (capab=0x471 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticated
wlan0: associate with AP 00:1d:19:13:d0:0d
wlan0: RX ReassocResp from 00:1d:19:13:d0:0d (capab=0x471 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticated
wlan0: associate with AP 00:1d:19:13:d0:0d
wlan0: RX ReassocResp from 00:1d:19:13:d0:0d (capab=0x471 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticated
wlan0: associate with AP 00:1d:19:13:d0:0d
wlan0: RX ReassocResp from 00:1d:19:13:d0:0d (capab=0x471 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticated
wlan0: associate with AP 00:1d:19:13:d0:0d
wlan0: RX ReassocResp from 00:1d:19:13:d0:0d (capab=0x471 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticated
wlan0: associate with AP 00:1d:19:13:d0:0d
wlan0: RX ReassocResp from 00:1d:19:13:d0:0d (capab=0x471 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticated
wlan0: associate with AP 00:1d:19:13:d0:0d
wlan0: RX ReassocResp from 00:1d:19:13:d0:0d (capab=0x471 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticated
wlan0: associate with AP 00:1d:19:13:d0:0d
wlan0: RX ReassocResp from 00:1d:19:13:d0:0d (capab=0x471 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticated
wlan0: associate with AP 00:1d:19:13:d0:0d
wlan0: RX ReassocResp from 00:1d:19:13:d0:0d (capab=0x471 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticated
wlan0: associate with AP 00:1d:19:13:d0:0d
wlan0: RX ReassocResp from 00:1d:19:13:d0:0d (capab=0x471 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticated
wlan0: associate with AP 00:1d:19:13:d0:0d
wlan0: RX ReassocResp from 00:1d:19:13:d0:0d (capab=0x471 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticated
wlan0: associate with AP 00:1d:19:13:d0:0d
wlan0: RX ReassocResp from 00:1d:19:13:d0:0d (capab=0x471 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticated
wlan0: associate with AP 00:1d:19:13:d0:0d
wlan0: RX ReassocResp from 00:1d:19:13:d0:0d (capab=0x471 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticated
wlan0: associate with AP 00:1d:19:13:d0:0d
wlan0: RX ReassocResp from 00:1d:19:13:d0:0d (capab=0x471 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticated
wlan0: associate with AP 00:1d:19:13:d0:0d
wlan0: RX ReassocResp from 00:1d:19:13:d0:0d (capab=0x471 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticated
wlan0: associate with AP 00:1d:19:13:d0:0d
wlan0: RX ReassocResp from 00:1d:19:13:d0:0d (capab=0x471 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticated
wlan0: associate with AP 00:1d:19:13:d0:0d
wlan0: RX ReassocResp from 00:1d:19:13:d0:0d (capab=0x471 status=0 aid=1)
wlan0: associated
ACPI: PCI interrupt for device 0000:04:00.0 disabled
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 100002, writing 100006)
Registered led device: iwl-phy0:radio
Registered led device: iwl-phy0:assoc
Registered led device: iwl-phy0:RX
Registered led device: iwl-phy0:TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: deauthenticating by local choice (reason=3)
ACPI: PCI interrupt for device 0000:04:00.0 disabled
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 100002, writing 100006)
Registered led device: iwl-phy0:radio
Registered led device: iwl-phy0:assoc
Registered led device: iwl-phy0:RX
Registered led device: iwl-phy0:TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticated
wlan0: associate with AP 00:1d:19:13:d0:0d
wlan0: RX AssocResp from 00:1d:19:13:d0:0d (capab=0x471 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: deauthenticated
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticated
wlan0: associate with AP 00:1d:19:13:d0:0d
wlan0: RX ReassocResp from 00:1d:19:13:d0:0d (capab=0x471 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticated
wlan0: associate with AP 00:1d:19:13:d0:0d
wlan0: RX ReassocResp from 00:1d:19:13:d0:0d (capab=0x471 status=0 aid=1)
wlan0: associated
wlan0: no IPv6 routers present
wlan0: deauthenticated
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticated
wlan0: associate with AP 00:1d:19:13:d0:0d
wlan0: RX ReassocResp from 00:1d:19:13:d0:0d (capab=0x471 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticated
wlan0: associate with AP 00:1d:19:13:d0:0d
wlan0: RX ReassocResp from 00:1d:19:13:d0:0d (capab=0x471 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticated
wlan0: associate with AP 00:1d:19:13:d0:0d
wlan0: RX ReassocResp from 00:1d:19:13:d0:0d (capab=0x471 status=0 aid=1)
wlan0: associated
wlan0: deauthenticated
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticated
wlan0: associate with AP 00:1d:19:13:d0:0d
wlan0: RX ReassocResp from 00:1d:19:13:d0:0d (capab=0x471 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating by local choice (reason=3)
ACPI: PCI interrupt for device 0000:04:00.0 disabled
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 100002, writing 100006)
Registered led device: iwl-phy0:radio
Registered led device: iwl-phy0:assoc
Registered led device: iwl-phy0:RX
Registered led device: iwl-phy0:TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticated
wlan0: associate with AP 00:1d:19:13:d0:0d
wlan0: RX AssocResp from 00:1d:19:13:d0:0d (capab=0x471 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
pcmcia: Detected deprecated PCMCIA ioctl usage from process: lshw.
pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
wlan0: No ProbeResp from current AP 00:1d:19:13:d0:0d - assume out of range
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authentication with AP 00:1d:19:13:d0:0d timed out
ACPI: PCI interrupt for device 0000:04:00.0 disabled
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 100002, writing 100006)
Registered led device: iwl-phy0:radio
Registered led device: iwl-phy0:assoc
Registered led device: iwl-phy0:RX
Registered led device: iwl-phy0:TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ACPI: PCI interrupt for device 0000:04:00.0 disabled
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 100002, writing 100006)
Registered led device: iwl-phy0:radio
Registered led device: iwl-phy0:assoc
Registered led device: iwl-phy0:RX
Registered led device: iwl-phy0:TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with AP 00:1d:19:13:d0:0d
wlan0: authenticated
wlan0: associate with AP 00:1d:19:13:d0:0d
wlan0: RX AssocResp from 00:1d:19:13:d0:0d (capab=0x471 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
Gelistirici mesaj listesiyle ilgili
daha fazla bilgi