From: Vasfi UYSAL (vasfi@med.ege.edu.tr)
Date: Fri 04 Apr 2003 - 14:45:41 EEST
Merhabalar
iptables ile nat yapan bi makine var , arkasindaki ip ler 10.10.
seklinde
bu makineye vpn kurmak istiyoum
/etc/pptpd.conf
speed 115200
option /etc/ppp/options.poptop
# TAG: debug
#
# Turns on (more) debugging to syslog.
#
debug
# TAG: localip
# TAG: remoteip
#
# Specifies the local and remote IP address ranges.
#
# You can specify single IP addresses seperated by commas or you
can
# specify ranges, or both. For example:
#
# 192.168.0.234,192.168.0.245-249,192.168.0.254
#
# IMPORTANT RESTRICTIONS:
#
# 1. No spaces are permitted between commas or within addresses.
#
# 2. If you give more IP addresses than MAX_CONNECTIONS, it will
# start at the beginning of the list and go until it gets
# MAX_CONNECTIONS IPs. Others will be ignored.
#
# 3. No shortcuts in ranges! ie. 234-8 does not mean 234 to 238,
# you must type 234-238 if you mean this.
#
# 4. If you give a single localIP, that's ok - all local IPs will
# be set to the given one. You MUST still give at least one
remote
# IP for each simultaneous client.
#
#localip 192.168.0.234-238,192.168.0.245
#remoteip 192.168.1.234-238,192.168.1.245
localip 155.223.206.20
remoteip 10.10.1.15-19
pidfile /var/run/pptpd.pid
seklinde
/etc/ppp/options.poptop ise su sekilde
ipparam PoPToP
lock
mtu 1490
mru 1490
ms-dns 10.10.1.2
multilink
proxyarp
+chap
+chapms
+chapms-v2
ipcp-accept-local
ipcp-accept-remote
lcp-echo-failure 30
lcp-echo-interval 5
deflate 0
#mppe-128
#mppe-stateless
#require-mppe
#require-mppe-stateless
fakat bi client (w2k yada xp ) baglanmak istedigi zaman asagidaki mesaj
geliyor ekrana
ne yapmam gerektigi konusunda yardimci olabilirseniz sevinirim
birde vpn ile baglanmaya calisan client icin authentication u nasil
yapabilirim
gate:~ # /usr/sbin/pppd: The remote system is required to authenticate
itself
/usr/sbin/pppd: but I couldn't find any suitable secret (password) for
it to use to do so.
cevaplar icin simdiden tesekkurler
- Vasfi UYSAL