From: Kaan (kaan_e@yahoo.com)
Date: Wed 09 Jul 2003 - 05:17:38 EEST
merhaba,
dediklerinizi yaptım ama yine bir sonuç alamadım.
loglarda gördüklerim üzerine düsününce sanki donanım
algılama sorunu varmıs gibi geldi. eklememi
istediğiniz çıktılar aşağıda:
linux:~ # ifconfig -a
eth0 Link encap:Ethernet HWaddr
00:08:A1:49:C6:D0
inet6 addr: fe80::208:a1ff:fe49:c6d0/64
Scope:Link
UP BROADCAST NOTRAILERS RUNNING MULTICAST
MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0
frame:0
TX packets:29 errors:0 dropped:0 overruns:0
carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:9900 (9.6 Kb)
Interrupt:11 Base address:0xc400
eth1 Link encap:Ethernet HWaddr
00:00:00:00:00:00
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0
frame:0
TX packets:0 errors:0 dropped:0 overruns:0
carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1220 errors:0 dropped:0
overruns:0 frame:0
TX packets:1220 errors:0 dropped:0
overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:105832 (103.3 Kb) TX bytes:105832
(103.3 Kb)
sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0
frame:0
TX packets:0 errors:0 dropped:0 overruns:0
carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
linux:~ # tail -50 /var/log/messages
Jul 9 04:39:01 linux last message repeated 3 times
Jul 9 04:39:12 linux kernel: eth1: no IPv6 routers
present
Jul 9 04:39:14 linux kernel: usb-uhci.c: interrupt,
status 2, frame# 470
Jul 9 04:39:14 linux kernel: CDCEther.c: rx status
-84
Jul 9 04:39:14 linux kernel: CDCEther.c: eth1: RX
status -84
Jul 9 04:39:14 linux kernel: CDCEther.c: rx status
-84
Jul 9 04:39:14 linux kernel: CDCEther.c: eth1: RX
status -84
Jul 9 04:39:14 linux kernel: CDCEther.c: rx status
-84
Jul 9 04:39:14 linux kernel: CDCEther.c: eth1: RX
status -84
Jul 9 04:39:14 linux kernel: usb.c: USB disconnect on
device 00:1f.2-1 address 5
Jul 9 04:39:14 linux kernel: CDCEther.c: got intr
callback
Jul 9 04:39:14 linux kernel: hub.c: new USB device
00:1f.2-1, assigned address 6
Jul 9 04:39:14 linux kernel: CDCEther.c: Ethernet
information found at device configuration. Trying to
use it anyway.
Jul 9 04:39:14 linux kernel: CDCEther.c: Found Header
descriptor, CDC version 110.
Jul 9 04:39:14 linux kernel: CDCEther.c: Imperfect
filtering support - need sw hashing
Jul 9 04:39:14 linux kernel: CDCEther.c: Can't use
SetEthernetMulticastFilters request
Jul 9 04:39:14 linux kernel: CDCEther.c: detected
BULK OUT packets of size 64
Jul 9 04:39:14 linux kernel: CDCEther.c: interrupt
address: 5
Jul 9 04:39:14 linux kernel: CDCEther.c: interrupt
interval: 64
Jul 9 04:39:14 linux kernel: usb.c: error getting
string descriptor 0 (error=-75)
Jul 9 04:39:14 linux kernel: CDCEther.c: Attempting
to get MAC address failed: 75
Jul 9 04:39:14 linux kernel: CDCEther.c: eth1:
Jul 9 04:39:14 linux kernel: CDCEther.c: eth1:
00:00:00:00:00:00
Jul 9 04:39:20 linux kernel: usb-uhci.c: ENXIO
80000680, flags 0, urb c2b3b520, burb c2b3b320
Jul 9 04:39:20 linux kernel: usbdevfs:
USBDEVFS_CONTROL failed dev 6 rqt 128 rq 6 len 9 ret
-6
Jul 9 04:39:20 linux kernel: usb-uhci.c: ENXIO
80000680, flags 0, urb c2b3b320, burb c2b3b520
Jul 9 04:39:20 linux kernel: usbdevfs:
USBDEVFS_CONTROL failed dev 6 rqt 128 rq 6 len 9 ret
-6
Jul 9 04:39:20 linux kernel: usb-uhci.c: ENXIO
80000680, flags 0, urb c2b3b520, burb c2b3b320
Jul 9 04:39:20 linux kernel: usbdevfs:
USBDEVFS_CONTROL failed dev 6 rqt 128 rq 6 len 9 ret
-6
Jul 9 04:39:20 linux kernel: usb-uhci.c: ENXIO
80000680, flags 0, urb c2b3b320, burb c2b3b520
Jul 9 04:39:20 linux kernel: usbdevfs:
USBDEVFS_CONTROL failed dev 6 rqt 128 rq 6 len 9 ret
-6
Jul 9 04:39:20 linux kernel: usb-uhci.c: ENXIO
80000680, flags 0, urb c2b3b520, burb c2b3b320
Jul 9 04:39:20 linux kernel: usbdevfs:
USBDEVFS_CONTROL failed dev 6 rqt 128 rq 6 len 9 ret
-6
Jul 9 04:39:20 linux kernel: usb-uhci.c: ENXIO
80000680, flags 0, urb c2b3b320, burb c2b3b520
Jul 9 04:39:20 linux kernel: usbdevfs:
USBDEVFS_CONTROL failed dev 6 rqt 128 rq 6 len 9 ret
-6
Jul 9 04:39:20 linux kernel: usb-uhci.c: ENXIO
80000680, flags 0, urb c2b3b520, burb c2b3b320
Jul 9 04:39:20 linux kernel: usbdevfs:
USBDEVFS_CONTROL failed dev 6 rqt 128 rq 6 len 9 ret
-6
Jul 9 04:39:20 linux kernel: usb-uhci.c: ENXIO
80000680, flags 0, urb c2b3b320, burb c2b3b520
Jul 9 04:39:20 linux kernel: usbdevfs:
USBDEVFS_CONTROL failed dev 6 rqt 128 rq 6 len 9 ret
-6
Jul 9 04:39:20 linux kernel: usb-uhci.c: ENXIO
80000680, flags 0, urb c2b3b520, burb c2b3b320
Jul 9 04:39:20 linux kernel: usbdevfs:
USBDEVFS_CONTROL failed dev 6 rqt 128 rq 6 len 9 ret
-6
Jul 9 04:39:20 linux kernel: usb-uhci.c: ENXIO
80000680, flags 0, urb c2b3b320, burb c2b3b520
Jul 9 04:39:20 linux kernel: usbdevfs:
USBDEVFS_CONTROL failed dev 6 rqt 128 rq 6 len 9 ret
-6
Jul 9 04:39:20 linux /etc/hotplug/usb.agent[3552]:
cannot get config descriptor 0, No such device or
address (6)
Jul 9 04:39:20 linux last message repeated 4 times
Jul 9 04:39:20 linux /etc/hotplug/usb.agent[3559]:
cannot get config descriptor 0, No such device or
address (6)
Jul 9 04:39:20 linux last message repeated 4 times
Jul 9 04:39:21 linux kernel: usb-uhci.c: interrupt,
status 2, frame# 1357
Jul 9 04:39:22 linux /etc/hotplug/net.agent[3425]: No
HW description found ... exiting
Jul 9 04:39:22 linux /etc/hotplug/net.agent[3451]: No
HW description found ... exiting
linux:~ # route -n
Kernel IP routing table
Destination Gateway Genmask Flags
Metric Ref Use Iface
linux:~ # dmesg
st adapter emulation for IDE ATAPI devices
Vendor: HL-DT-ST Model: CD-RW GCE-8240B Rev: 1.07
Type: CD-ROM ANSI SCSI
revision: 02
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (2047 buckets, 16376 max) -
296 bytes per conntrack
dmfe: Davicom DM9xxx net driver, version 1.36.4
(2002-01-17)
PCI: Found IRQ 11 for device 02:03.0
eth0: Davicom DM9102 at pci02:03.0, 00:08:a1:49:c6:d0,
irq 11.
raw1394: /dev/raw1394 device initialized
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 18:24:43 Mar 17
2003
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:1f.2
PCI: Setting latency timer of device 00:1f.2 to 64
usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 11 for device 00:1f.4
PCI: Setting latency timer of device 00:1f.4 to 64
usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller
Interface driver
uhci.c: USB Universal Host Controller Interface driver
v1.1
hub.c: new USB device 00:1f.2-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x69a/0x302) is not
claimed by any active driver.
mice: PS/2 mouse device common for all mice
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0,
lun 0
sr0: scsi3-mmc drive: 24x/40x writer cd/rw xa/form2
cdda tray
usb-uhci.c: interrupt, status 2, frame# 1681
usb.c: error getting string descriptor 0 (error=-75)
usb-uhci.c: ENXIO 80000280, flags 0, urb c2b3bea0,
burb c241a140
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6
len 71 ret -6
usb-uhci.c: ENXIO 80000280, flags 0, urb c241a140,
burb c2b3bea0
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000280, flags 0, urb c2b3bea0,
burb c241a140
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000280, flags 0, urb c241a140,
burb c2b3bea0
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000280, flags 0, urb c2b3bea0,
burb c241a140
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000280, flags 0, urb c241a140,
burb c2b3bea0
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000280, flags 0, urb c2b3bea0,
burb c241a140
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000280, flags 0, urb c241a140,
burb c2b3bea0
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000280, flags 0, urb c2b3bea0,
burb c241a140
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: interrupt, status 2, frame# 236
PCI: Found IRQ 3 for device 02:05.0
PCI: Sharing IRQ 3 with 02:01.0
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
usb-uhci.c: interrupt, status 2, frame# 1231
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel
Module 1.0-4363 Sat Apr 19 17:46:46 PDT 2003
eth0: no IPv6 routers present
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory:
203M
agpgart: Detected Intel i850 chipset
agpgart: AGP aperture is 64M @ 0xd8000000
Linux video capture interface: v1.00
i2c-core.o: i2c core module version 2.7.0 (20021208)
i2c-algo-bit.o: i2c bit algorithm module version 2.7.0
(20021208)
bttv: driver version 0.7.105 loaded
bttv: using 4 buffers with 2080k (8320k total) for
capture
bttv: Host bridge is Intel Corp. 82850 850 (Tehama)
Chipset Host Bridge (MCH)
bttv: Bt8xx card found (0).
PCI: Found IRQ 3 for device 02:01.0
PCI: Sharing IRQ 3 with 02:05.0
bttv0: Bt848 (rev 18) at 02:01.0, irq: 3, latency: 32,
mmio: 0xe0000000
bttv0: using: BT848A( *** UNKNOWN/GENERIC **)
[card=0,autodetected]
i2c-algo-bit.o: Adapter: bt848 #0 scl: 1 sda: 1 --
testing...
i2c-algo-bit.o:1 scl: 1 sda: 0
i2c-algo-bit.o:2 scl: 1 sda: 1
i2c-algo-bit.o:3 scl: 0 sda: 1
i2c-algo-bit.o:4 scl: 1 sda: 1
i2c-algo-bit.o: bt848 #0 passed test.
bttv: readee error
bttv0: using tuner=-1
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: registered device video0
bttv0: registered device vbi0
CDCEther.c: CDCEther.c: 0.98.6 7 Jan 2002 Brad Hards
and another
usb.c: registered new driver CDCEther
CDCEther.c: Ethernet information found at device
configuration. Trying to use it anyway.
CDCEther.c: Found Header descriptor, CDC version 110.
CDCEther.c: Imperfect filtering support - need sw
hashing
CDCEther.c: Can't use SetEthernetMulticastFilters
request
CDCEther.c: detected BULK OUT packets of size 64
CDCEther.c: interrupt address: 5
CDCEther.c: interrupt interval: 64
CDCEther.c: Attempting to get MAC address returned 0
bytes
usb-uhci.c: interrupt, status 2, frame# 1236
CDCEther.c: eth1:
CDCEther.c: eth1: 00:00:00:00:00:00
CDCEther.c: eth1: set multicast filters
CDCEther.c: eth1: too many MC filters for hardware,
using allmulti
CDCEther.c: eth1: too many MC filters for hardware,
using allmulti
CDCEther.c: eth1: too many MC filters for hardware,
using allmulti
usb-uhci.c: interrupt, status 2, frame# 892
CDCEther.c: rx status -84
CDCEther.c: eth1: RX status -84
CDCEther.c: rx status -84
CDCEther.c: eth1: RX status -84
CDCEther.c: rx status -84
CDCEther.c: eth1: RX status -84
CDCEther.c: rx status -84
CDCEther.c: eth1: RX status -84
usb.c: USB disconnect on device 00:1f.2-1 address 2
CDCEther.c: got intr callback
hub.c: new USB device 00:1f.2-1, assigned address 3
CDCEther.c: Ethernet information found at device
configuration. Trying to use it anyway.
CDCEther.c: Found Header descriptor, CDC version 110.
CDCEther.c: Imperfect filtering support - need sw
hashing
CDCEther.c: Can't use SetEthernetMulticastFilters
request
CDCEther.c: detected BULK OUT packets of size 64
CDCEther.c: interrupt address: 5
CDCEther.c: interrupt interval: 64
CDCEther.c: Attempting to get MAC address failed: 75
CDCEther.c: eth1:
CDCEther.c: eth1: 00:00:00:00:00:00
usb.c: registered new driver acm
acm.c: v0.21:USB Abstract Control Model driver for USB
modems and ISDN adapters
usb-uhci.c: ENXIO 80000380, flags 0, urb c36260e0,
burb c3626160
usbdevfs: USBDEVFS_CONTROL failed dev 3 rqt 128 rq 6
len 71 ret -6
usb-uhci.c: ENXIO 80000380, flags 0, urb c3626160,
burb c36260e0
usbdevfs: USBDEVFS_CONTROL failed dev 3 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000380, flags 0, urb c36260e0,
burb c3626160
usbdevfs: USBDEVFS_CONTROL failed dev 3 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000380, flags 0, urb c3626160,
burb c36260e0
usbdevfs: USBDEVFS_CONTROL failed dev 3 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000380, flags 0, urb c36260e0,
burb c3626160
usbdevfs: USBDEVFS_CONTROL failed dev 3 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000380, flags 0, urb c3626160,
burb c36260e0
usbdevfs: USBDEVFS_CONTROL failed dev 3 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000380, flags 0, urb c36260e0,
burb c3626160
usbdevfs: USBDEVFS_CONTROL failed dev 3 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000380, flags 0, urb c3626160,
burb c36260e0
usbdevfs: USBDEVFS_CONTROL failed dev 3 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: interrupt, status 2, frame# 1846
CDCEther.c: eth1: set multicast filters
CDCEther.c: eth1: too many MC filters for hardware,
using allmulti
CDCEther.c: eth1: too many MC filters for hardware,
using allmulti
CDCEther.c: eth1: too many MC filters for hardware,
using allmulti
CDCEther.c: eth1: too many MC filters for hardware,
using allmulti
CDCEther.c: eth1: too many MC filters for hardware,
using allmulti
CDCEther.c: eth1: too many MC filters for hardware,
using allmulti
CDCEther.c: eth1: too many MC filters for hardware,
using allmulti
usb-uhci.c: interrupt, status 2, frame# 1207
CDCEther.c: rx status -84
CDCEther.c: eth1: RX status -84
CDCEther.c: rx status -84
CDCEther.c: eth1: RX status -84
CDCEther.c: rx status -84
CDCEther.c: eth1: RX status -84
usb.c: USB disconnect on device 00:1f.2-1 address 3
CDCEther.c: got intr callback
hub.c: new USB device 00:1f.2-1, assigned address 4
CDCEther.c: Ethernet information found at device
configuration. Trying to use it anyway.
CDCEther.c: Found Header descriptor, CDC version 110.
CDCEther.c: Imperfect filtering support - need sw
hashing
CDCEther.c: Can't use SetEthernetMulticastFilters
request
CDCEther.c: detected BULK OUT packets of size 64
CDCEther.c: interrupt address: 5
CDCEther.c: interrupt interval: 64
usb.c: error getting string descriptor 0 (error=-75)
CDCEther.c: Attempting to get MAC address failed: 75
CDCEther.c: eth1:
CDCEther.c: eth1: 00:00:00:00:00:00
usb-uhci.c: ENXIO 80000480, flags 0, urb c36264e0,
burb c3626260
usbdevfs: USBDEVFS_CONTROL failed dev 4 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000480, flags 0, urb c3626260,
burb c36264e0
usbdevfs: USBDEVFS_CONTROL failed dev 4 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000480, flags 0, urb c36264e0,
burb c3626260
usbdevfs: USBDEVFS_CONTROL failed dev 4 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000480, flags 0, urb c3626260,
burb c36264e0
usbdevfs: USBDEVFS_CONTROL failed dev 4 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000480, flags 0, urb c36264e0,
burb c3626260
usbdevfs: USBDEVFS_CONTROL failed dev 4 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000480, flags 0, urb c3626260,
burb c36264e0
usbdevfs: USBDEVFS_CONTROL failed dev 4 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000480, flags 0, urb c36264e0,
burb c3626260
usbdevfs: USBDEVFS_CONTROL failed dev 4 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000480, flags 0, urb c3626260,
burb c36264e0
usbdevfs: USBDEVFS_CONTROL failed dev 4 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000480, flags 0, urb c36264e0,
burb c3626260
usbdevfs: USBDEVFS_CONTROL failed dev 4 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000480, flags 0, urb c3626260,
burb c36264e0
usbdevfs: USBDEVFS_CONTROL failed dev 4 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: interrupt, status 2, frame# 229
CDCEther.c: eth1: set multicast filters
CDCEther.c: eth1: too many MC filters for hardware,
using allmulti
CDCEther.c: eth1: too many MC filters for hardware,
using allmulti
CDCEther.c: eth1: too many MC filters for hardware,
using allmulti
CDCEther.c: eth1: too many MC filters for hardware,
using allmulti
usb-uhci.c: interrupt, status 2, frame# 1348
CDCEther.c: rx status -84
CDCEther.c: eth1: RX status -84
CDCEther.c: rx status -84
CDCEther.c: eth1: RX status -84
usb.c: USB disconnect on device 00:1f.2-1 address 4
CDCEther.c: got intr callback
hub.c: new USB device 00:1f.2-1, assigned address 5
CDCEther.c: Ethernet information found at device
configuration. Trying to use it anyway.
CDCEther.c: Found Header descriptor, CDC version 110.
CDCEther.c: Imperfect filtering support - need sw
hashing
CDCEther.c: Can't use SetEthernetMulticastFilters
request
CDCEther.c: detected BULK OUT packets of size 64
CDCEther.c: interrupt address: 5
CDCEther.c: interrupt interval: 64
CDCEther.c: Attempting to get MAC address failed: 75
CDCEther.c: eth1:
CDCEther.c: eth1: 00:00:00:00:00:00
usb-uhci.c: ENXIO 80000580, flags 0, urb c241a340,
burb c241a2c0
usbdevfs: USBDEVFS_CONTROL failed dev 5 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000580, flags 0, urb c241a2c0,
burb c241a340
usbdevfs: USBDEVFS_CONTROL failed dev 5 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000580, flags 0, urb c241a340,
burb c241a2c0
usbdevfs: USBDEVFS_CONTROL failed dev 5 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000580, flags 0, urb c241a2c0,
burb c241a340
usbdevfs: USBDEVFS_CONTROL failed dev 5 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000580, flags 0, urb c241a340,
burb c241a2c0
usbdevfs: USBDEVFS_CONTROL failed dev 5 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000580, flags 0, urb c241a2c0,
burb c241a340
usbdevfs: USBDEVFS_CONTROL failed dev 5 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000580, flags 0, urb c241a340,
burb c241a2c0
usbdevfs: USBDEVFS_CONTROL failed dev 5 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000580, flags 0, urb c241a2c0,
burb c241a340
usbdevfs: USBDEVFS_CONTROL failed dev 5 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000580, flags 0, urb c241a340,
burb c241a2c0
usbdevfs: USBDEVFS_CONTROL failed dev 5 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000580, flags 0, urb c241a2c0,
burb c241a340
usbdevfs: USBDEVFS_CONTROL failed dev 5 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000580, flags 0, urb c241a340,
burb c241a2c0
usbdevfs: USBDEVFS_CONTROL failed dev 5 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: interrupt, status 2, frame# 128
usb-uhci.c: interrupt, status 2, frame# 1267
usb.c: deregistering driver acm
CDCEther.c: eth1: set multicast filters
CDCEther.c: eth1: too many MC filters for hardware,
using allmulti
CDCEther.c: eth1: too many MC filters for hardware,
using allmulti
CDCEther.c: eth1: too many MC filters for hardware,
using allmulti
CDCEther.c: eth1: too many MC filters for hardware,
using allmulti
eth1: no IPv6 routers present
usb-uhci.c: interrupt, status 2, frame# 470
CDCEther.c: rx status -84
CDCEther.c: eth1: RX status -84
CDCEther.c: rx status -84
CDCEther.c: eth1: RX status -84
CDCEther.c: rx status -84
CDCEther.c: eth1: RX status -84
usb.c: USB disconnect on device 00:1f.2-1 address 5
CDCEther.c: got intr callback
hub.c: new USB device 00:1f.2-1, assigned address 6
CDCEther.c: Ethernet information found at device
configuration. Trying to use it anyway.
CDCEther.c: Found Header descriptor, CDC version 110.
CDCEther.c: Imperfect filtering support - need sw
hashing
CDCEther.c: Can't use SetEthernetMulticastFilters
request
CDCEther.c: detected BULK OUT packets of size 64
CDCEther.c: interrupt address: 5
CDCEther.c: interrupt interval: 64
usb.c: error getting string descriptor 0 (error=-75)
CDCEther.c: Attempting to get MAC address failed: 75
CDCEther.c: eth1:
CDCEther.c: eth1: 00:00:00:00:00:00
usb-uhci.c: ENXIO 80000680, flags 0, urb c2b3b520,
burb c2b3b320
usbdevfs: USBDEVFS_CONTROL failed dev 6 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000680, flags 0, urb c2b3b320,
burb c2b3b520
usbdevfs: USBDEVFS_CONTROL failed dev 6 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000680, flags 0, urb c2b3b520,
burb c2b3b320
usbdevfs: USBDEVFS_CONTROL failed dev 6 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000680, flags 0, urb c2b3b320,
burb c2b3b520
usbdevfs: USBDEVFS_CONTROL failed dev 6 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000680, flags 0, urb c2b3b520,
burb c2b3b320
usbdevfs: USBDEVFS_CONTROL failed dev 6 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000680, flags 0, urb c2b3b320,
burb c2b3b520
usbdevfs: USBDEVFS_CONTROL failed dev 6 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000680, flags 0, urb c2b3b520,
burb c2b3b320
usbdevfs: USBDEVFS_CONTROL failed dev 6 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000680, flags 0, urb c2b3b320,
burb c2b3b520
usbdevfs: USBDEVFS_CONTROL failed dev 6 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000680, flags 0, urb c2b3b520,
burb c2b3b320
usbdevfs: USBDEVFS_CONTROL failed dev 6 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: ENXIO 80000680, flags 0, urb c2b3b320,
burb c2b3b520
usbdevfs: USBDEVFS_CONTROL failed dev 6 rqt 128 rq 6
len 9 ret -6
usb-uhci.c: interrupt, status 2, frame# 1357
CDCEther modülü basta yüklenmiyor!
linuxquestions.org sitesindeki bir yazıda acm modülü
ile ilgili birsey vardı. dial-up usb modemler içinmis.
bu modülü kaldırmak içinse rmmod acm yazmak
gerekiyormus. ben kendi sistemimde bunu yazdığımda
(root iken) herhangi bir hata mesajı almıyorum. yani
öyle bir modül yüklüymüs ve ben onu kapatmısım diye
düsünüyorum. belki bu da sorunun bir parçasıdır diye
düsündüm. çünkü linux kablo modemi hala normal modem
bölümünde görüyor!
ethernet ayarlarında da herhangi bir sorun olmadı ama
sonuç yine sıfır. ifdown eth0; ifup eth0 yapınca DHCP
ile ilgili bir satır cıkıyor ve IP bilgisini aldığını
söylüyor. sonra da IP bilgisi alınamadı gibi bir mesaj
veriyor. bu arada modemin üzerindeki PC bağlantısı
ışığı yanıp sönüyor. aynı yanıp sönme ifconfig eth1
195.174.x.x netmask 255.255.240.0 yaptığımda da
oluyor. bazen de bu komuttan sonra 1-2 bip sesi
duyuluyor bilgisayardan. sonuncusu bazen sönük oluyor,
sanırım bu olumsuz anlamında!
acpi off komutunun bir yararı olur mu? çünkü geçen gün
bağlanmadan önce bu komutu çalıstırmıstım.
gercekten anlamadım bunları. neden bu kadar zor oldu?
bir yerde hata yapıyor da görmüyor muyum acaba?
ayrıca tools bölümünde USB Viewer diye birsey
görmüstüm. yükledim, CDCEther modülünü gösteriyor.
çıktısını yazı olarak alamadım, screenshot aldım. onu
da bu adrese attım:
http://komplike.port5.com/depo/CDCEther.png belki bir
ise yarar...
simdilik böyle.. tesekkür ederim...
__________________________________
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com
--- linux-baslangic listesinden cikmak ve tum listeci islemleri icin http://liste.linux.org.tr/ adresini kullanabilirisniz. Bu listeden cikmak icin <a href="mailto:linux-baslangic-request?Subject=unsubscribe"> tiklayiniz </a>
