Re: xwindows

Murat SAYGILI (saygili@ume1.mam.gov.tr)
Wed, 16 Jul 1997 13:24:33 +0300 (EET DST)


Sisteme dediginiz gibi startx yazdim ve su sonucu gordum
ne yapmam lazim.Cikarken de ctrl-c ile ciktim.Eger yazarsaniz sevinirim.
Murat

XFree86 Version 3.1.2 / X Window System
(protocol Version 11, revision 0, vendor release 6000)
Operating System: Linux
Configured drivers:
S3: accelerated server for S3 graphics adaptors (Patchlevel 0)
mmio_928, s3_generic
(using VT number 7)

XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) Mouse: type: PS/2, device: /dev/mouse, baudrate: 1200
(**) S3: Graphics device ID: "S3"
(**) S3: Monitor ID: "Generic Monitor"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(--) S3: card type: 386/486 localbus
(--) S3: chipset: 805, rev C or above
(**) S3: chipset driver: s3_generic
(**) S3: videoram: 512k
(--) S3: Ramdac type: att20c490
(--) S3: Ramdac speed: 110
(**) S3: clocks: 25.00 28.00 45.00 36.00 57.00 65.00 50.00 40.00
(**) S3: clocks: 25.00 28.00 0.00 45.00 72.00 77.00 80.00 75.00
(--) S3: Maximum allowed dot-clock: 110.000 MHz
(**) S3: Mode "640x480": mode clock = 25.175, clock used = 25.000
(--) S3: Using 6 bits per RGB value
(**) S3: Virtual resolution set to 640x480
(--) S3: Local bus LAW is 0x7FCxxxxx
(--) S3: Using a banksize of 512k, line width of 640
(--) S3: Using a single 64x64 area at (576,482) for expanding pixmaps
(--) S3: Using 8 planes of 576x337 at (0,482) aligned 8 as font cache
xinit: unexpected signal 2
waiting for X server to shut down X connection to :0.0 broken (explicit kill or server shutdown).

------------------------------------------
Murat SAYGILI
TUBITAK MAM UME
TEL: (262) 6466355 4-lines / 420-470
FAX: (262) 6465914
e-mail: saygili@ume1.mam.gov.tr
------------------------------------------